[2617] added "exiting" log message to those that don't have it until now.

src/bin/auth/auth_messages.mes

@@ -312,6 +312,9 @@ been created and is initializing. The AUTH_SERVER_STARTED message will be
 output when initialization has successfully completed and the server starts
 accepting queries.
 
+% AUTH_SERVER_EXITING exiting
+The authoritative server is exiting.
+
 % AUTH_SERVER_FAILED server failed: %1
 The authoritative server has encountered a fatal error and is terminating. The
 reason for the failure is included in the message.

src/bin/auth/main.cc

@@ -44,6 +44,7 @@
 #include <server_common/socket_request.h>
 
 #include <boost/bind.hpp>
+#include <boost/scoped_ptr.hpp>
 
 #include <sys/types.h>
 #include <sys/socket.h>
@@ -152,10 +153,11 @@ main(int argc, char* argv[]) {
     int ret = 0;
 
     // XXX: we should eventually pass io_service here.
-    Session* cc_session = NULL;
-    Session* xfrin_session = NULL;
+    boost::scoped_ptr<AuthSrv> auth_server_; // placeholder
+    boost::scoped_ptr<Session> cc_session;
+    boost::scoped_ptr<Session> xfrin_session;
     bool xfrin_session_established = false; // XXX (see Trac #287)
-    ModuleCCSession* config_session = NULL;
+    boost::scoped_ptr<ModuleCCSession> config_session;
     XfroutClient xfrout_client(getXfroutSocketPath());
     SocketSessionForwarder ddns_forwarder(getDDNSSocketPath());
     try {
@@ -167,7 +169,8 @@ main(int argc, char* argv[]) {
             specfile = string(AUTH_SPECFILE_LOCATION);
         }
 
-        auth_server = new AuthSrv(xfrout_client, ddns_forwarder);
+        auth_server_.reset(new AuthSrv(xfrout_client, ddns_forwarder));
+        auth_server = auth_server_.get();
         LOG_INFO(auth_logger, AUTH_SERVER_CREATED);
 
         SimpleCallback* checkin = auth_server->getCheckinProvider();
@@ -179,7 +182,7 @@ main(int argc, char* argv[]) {
         auth_server->setDNSService(dns_service);
         LOG_DEBUG(auth_logger, DBG_AUTH_START, AUTH_DNS_SERVICES_CREATED);
 
-        cc_session = new Session(io_service.get_io_service());
+        cc_session.reset(new Session(io_service.get_io_service()));
         LOG_DEBUG(auth_logger, DBG_AUTH_START, AUTH_CONFIG_CHANNEL_CREATED);
         // Initialize the Socket Requestor
         isc::server_common::initSocketRequestor(*cc_session, AUTH_NAME);
@@ -191,18 +194,18 @@ main(int argc, char* argv[]) {
         // updateConfig() for listen_on and in initializing TSIG keys below).
         // Until then all operations on the CC session will take place
         // synchronously.
-        config_session = new ModuleCCSession(specfile, *cc_session,
-                                             my_config_handler,
-                                             my_command_handler, false);
+        config_session.reset(new ModuleCCSession(specfile, *cc_session,
+                                                 my_config_handler,
+                                                 my_command_handler, false));
         LOG_DEBUG(auth_logger, DBG_AUTH_START, AUTH_CONFIG_CHANNEL_ESTABLISHED);
 
-        xfrin_session = new Session(io_service.get_io_service());
+        xfrin_session.reset(new Session(io_service.get_io_service()));
         LOG_DEBUG(auth_logger, DBG_AUTH_START, AUTH_XFRIN_CHANNEL_CREATED);
         xfrin_session->establish(NULL);
         xfrin_session_established = true;
         LOG_DEBUG(auth_logger, DBG_AUTH_START, AUTH_XFRIN_CHANNEL_ESTABLISHED);
 
-        auth_server->setXfrinSession(xfrin_session);
+        auth_server->setXfrinSession(xfrin_session.get());
 
         // Configure the server.  configureAuthServer() is expected to install
         // all initial configurations, but as a short term workaround we
@@ -210,7 +213,7 @@ main(int argc, char* argv[]) {
         // updateConfig().
         // if server load configure failed, we won't exit, give user second
         // chance to correct the configure.
-        auth_server->setConfigSession(config_session);
+        auth_server->setConfigSession(config_session.get());
         try {
             configureAuthServer(*auth_server, config_session->getFullConfig());
             auth_server->updateConfig(ElementPtr());
@@ -228,7 +231,7 @@ main(int argc, char* argv[]) {
         config_session->addRemoteConfig("data_sources",
                                         boost::bind(datasrcConfigHandler,
                                                     auth_server, &first_time,
-                                                    config_session,
+                                                    config_session.get(),
                                                     _1, _2, _3),
                                         false);
 
@@ -260,10 +263,7 @@ main(int argc, char* argv[]) {
         config_session->removeRemoteConfig("data_sources");
     }
 
-    delete xfrin_session;
-    delete config_session;
-    delete cc_session;
-    delete auth_server;
+    LOG_INFO(auth_logger, AUTH_SERVER_EXITING);
 
     return (ret);
 }

src/bin/cmdctl/cmdctl.py.in

@@ -650,4 +650,6 @@ if __name__ == '__main__':
     if httpd:
         httpd.shutdown()
 
+    logger.info(CMDCTL_EXITING)
+
     sys.exit(result)

src/bin/cmdctl/cmdctl_messages.mes

@@ -43,6 +43,9 @@ specific error is printed in the message.
 This debug message indicates that the given command has been sent to
 the given module.
 
+% CMDCTL_EXITING exiting
+The b10-cmdctl daemon is exiting.
+
 % CMDCTL_NO_SUCH_USER username not found in user database: %1
 A login attempt was made to b10-cmdctl, but the username was not known.
 Users can be added with the tool b10-cmdctl-usermgr.

src/bin/msgq/msgq.py.in

@@ -815,3 +815,5 @@ if __name__ == "__main__":
         pass
 
     msgq.shutdown()
+
+    logger.info(MSGQ_EXITING)

src/bin/msgq/msgq_messages.mes

@@ -59,6 +59,9 @@ the message queue version and version of the module.
 % MSGQ_CONFIG_DATA Received configuration update for the msgq: %1
 Debug message. The message queue received a configuration update, handling it.
 
+% MSGQ_EXITING exiting
+The msgq daemon is exiting.
+
 % MSGQ_HDR_DECODE_ERR Error decoding header received from socket %1: %2
 The socket with mentioned file descriptor sent a packet. However, it was not
 possible to decode the routing header of the packet. The packet is ignored.

src/bin/stats/stats.py.in

@@ -696,3 +696,5 @@ if __name__ == "__main__":
         sys.exit(1)
     except KeyboardInterrupt as kie:
         logger.info(STATS_STOPPED_BY_KEYBOARD)
+
+    logger.info(STATS_EXITING)

src/bin/stats/stats_httpd.py.in

@@ -631,3 +631,5 @@ if __name__ == "__main__":
         sys.exit(1)
     except KeyboardInterrupt as kie:
         logger.info(STATSHTTPD_STOPPED_BY_KEYBOARD)
+
+    logger.info(STATSHTTPD_EXITING)

src/bin/stats/stats_httpd_messages.mes

@@ -32,10 +32,19 @@ address and port number.
 Debug message indicating that the stats-httpd module is disconnecting
 from the command and control bus.
 
+% STATSHTTPD_EXITING exiting
+The stats HTTP server is exiting.
+
 % STATSHTTPD_HANDLE_CONFIG reading configuration: %1
 The stats-httpd daemon has received new configuration data and will now
 process it. The (changed) data is printed.
 
+% STATSHTTPD_HTTPLOG %1 %2
+Debug HTTP log message. These are the messages logged by the http server
+instance. For most logs, the message shows HTTP client and query
+information like HTTP method, URI, and status code, but the http server
+can also log other information, such as extended status reports.
+
 % STATSHTTPD_RECEIVED_SHUTDOWN_COMMAND shutdown command received
 A shutdown command was sent to the stats-httpd module, and it will
 now shut down.
@@ -96,9 +105,3 @@ configuration is unknown. The new configuration is ignored, and an
 error is sent back. As possible cause is that there was an upgrade
 problem, and the stats-httpd version is out of sync with the rest of
 the system.
-
-% STATSHTTPD_HTTPLOG %1 %2
-Debug HTTP log message. These are the messages logged by the http server
-instance. For most logs, the message shows HTTP client and query
-information like HTTP method, URI, and status code, but the http server
-can also log other information, such as extended status reports.

src/bin/stats/stats_messages.mes

@@ -24,6 +24,9 @@ The stats module was unable to connect to the BIND 10 command and
 control bus. A likely problem is that the message bus daemon
 (b10-msgq) is not running. The stats module will now shut down.
 
+% STATS_EXITING exiting
+The stats module process is exiting.
+
 % STATS_RECEIVED_INVALID_STATISTICS_DATA received invalid statistics data from %1
 Invalid statistics data has been received from the module while
 polling and it has been discarded.

src/bin/xfrin/xfrin.py.in

@@ -1738,5 +1738,7 @@ def main(xfrin_class, use_signal=True):
     if xfrind:
         xfrind.shutdown()
 
+    logger.info(XFRIN_EXITING)
+
 if __name__ == '__main__':
     main(Xfrin)

src/bin/xfrin/xfrin_messages.mes

@@ -60,6 +60,9 @@ error is given in the log message.
 There was an error opening a connection to the master. The error is
 shown in the log message.
 
+% XFRIN_EXITING exiting
+The xfrin daemon is exiting.
+
 % XFRIN_GOT_INCREMENTAL_RESP got incremental response for %1
 In an attempt of IXFR processing, the beginning SOA of the first difference
 (following the initial SOA that specified the final SOA for all the

src/bin/xfrout/xfrout.py.in

@@ -1274,7 +1274,7 @@ if '__main__' == __name__:
         xfrout_server = XfroutServer()
         xfrout_server.run()
     except KeyboardInterrupt:
-        logger.INFO(XFROUT_STOPPED_BY_KEYBOARD)
+        logger.info(XFROUT_STOPPED_BY_KEYBOARD)
     except SessionError as e:
         logger.error(XFROUT_CC_SESSION_ERROR, str(e))
     except ModuleCCSessionError as e:
@@ -1287,3 +1287,4 @@ if '__main__' == __name__:
     if xfrout_server:
         xfrout_server.shutdown()
 
+    logger.info(XFROUT_EXITING)

src/bin/xfrout/xfrout_messages.mes

@@ -32,6 +32,9 @@ configuration manager b10-cfgmgr is not running.
 The xfrout process encountered an error when installing the configuration at
 startup time.  Details of the error are included in the log message.
 
+% XFROUT_EXITING exiting
+The xfrout daemon is exiting.
+
 % XFROUT_FETCH_REQUEST_ERROR socket error while fetching a request from the auth daemon
 There was a socket error while contacting the b10-auth daemon to
 fetch a transfer request. The auth daemon may have shutdown.

src/bin/zonemgr/zonemgr.py.in

@@ -714,4 +714,4 @@ if '__main__' == __name__:
     if zonemgrd and zonemgrd.running:
         zonemgrd.shutdown()
 
-    logger.debug(DBG_START_SHUT, ZONEMGR_SHUTDOWN)
+    logger.info(ZONEMGR_SHUTDOWN)

src/bin/zonemgr/zonemgr_messages.mes

@@ -114,7 +114,7 @@ connecting to the command channel daemon.  The most usual cause of this
 problem is that the daemon is not running.
 
 % ZONEMGR_SHUTDOWN zone manager has shut down
-A debug message, output when the zone manager has shut down completely.
+The zone manager has shut down completely.
 
 % ZONEMGR_STARTED zonemgr started
 This informational message is output by zonemgr when all initialization