# Copyright (C) 2011 Internet Systems Consortium, Inc. ("ISC") # # Permission to use, copy, modify, and/or distribute this software for any # purpose with or without fee is hereby granted, provided that the above # copyright notice and this permission notice appear in all copies. # # THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH # REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY # AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT, # INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM # LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE # OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR # PERFORMANCE OF THIS SOFTWARE. $NAMESPACE isc::auth % AUTH_AXFR_ERROR error handling AXFR request: %1 This is a debug message produced by the authoritative server when it has encountered an error processing an AXFR request. The message gives the reason for the error, and the server will return a SERVFAIL code to the sender. % AUTH_AXFR_UDP AXFR query received over UDP This is a debug message output when the authoritative server has received an AXFR query over UDP. Use of UDP for AXFRs is not permitted by the protocol, so the server will return a FORMERR error to the sender. % AUTH_COMMAND_FAILED execution of command channel instruction '%1' failed: %2 Execution of the specified command by the authoritative server failed. The message contains the reason for the failure. % AUTH_CONFIG_CHANNEL_CREATED configuration session channel created This is a debug message indicating that authoritative server has created the channel to the configuration manager. It is issued during server startup is an indication that the initialization is proceeding normally. % AUTH_CONFIG_CHANNEL_ESTABLISHED configuration session channel established This is a debug message indicating that authoritative server has established communication the configuration manager over the previously-created channel. It is issued during server startup is an indication that the initialization is proceeding normally. % AUTH_CONFIG_CHANNEL_STARTED configuration session channel started This is a debug message, issued when the authoritative server has posted a request to be notified when new configuration information is available. It is issued during server startup is an indication that the initialization is proceeding normally. % AUTH_CONFIG_LOAD_FAIL load of configuration failed: %1 An attempt to configure the server with information from the configuration database during the startup sequence has failed. (The reason for the failure is given in the message.) The server will continue its initialization although it may not be configured in the desired way. % AUTH_CONFIG_UPDATE_FAIL update of configuration failed: %1 At attempt to update the configuration the server with information from the configuration database has failed, the reason being given in the message. % AUTH_DATA_SOURCE data source database file: %1 This is a debug message produced by the authoritative server when it accesses a datebase data source, listing the file that is being accessed. % AUTH_DNS_SERVICES_CREATED DNS services created This is a debug message indicating that the component that will handling incoming queries for the authoritative server (DNSServices) has been successfully created. It is issued during server startup is an indication that the initialization is proceeding normally. % AUTH_HEADER_PARSE_FAIL unable to parse header in received DNS packet: %1 This is a debug message, generated by the authoritative server when an attempt to parse the header of a received DNS packet has failed. (The reason for the failure is given in the message.) The server will drop the packet. % AUTH_LOAD_TSIG loading TSIG keys This is a debug message indicating that the authoritative server has requested the keyring holding TSIG keys from the configuration database. It is issued during server startup is an indication that the initialization is proceeding normally. % AUTH_LOAD_ZONE loaded zone %1/%2 This debug message is issued during the processing of the 'loadzone' command when the authoritative server has successfully loaded the named zone of the named class. % AUTH_MEM_DATASRC_DISABLED memory data source is disabled for class %1 This is a debug message reporting that the authoritative server has discovered that the memory data source is disabled for the given class. % AUTH_MEM_DATASRC_ENABLED memory data source is enabled for class %1 This is a debug message reporting that the authoritative server has discovered that the memory data source is enabled for the given class. % AUTH_NO_STATS_SESSION session interface for statistics is not available The authoritative server had no session with the statistics module at the time it attempted to send it data: the attempt has been abandoned. This could be an error in configuration. % AUTH_NO_XFRIN received NOTIFY but XFRIN session is not running This is a debug message produced by the authoritative server when it receives a NOTIFY packet but the XFRIN process is not running. The packet will be dropped and nothing returned to the sender. % AUTH_NOTIFY_RRTYPE invalid question RR type (%1) in incoming NOTIFY This debug message is logged by the authoritative server when it receives a NOTIFY packet that an RR type of something other than SOA in the question section. (The RR type received is included in the message.) The server will return a FORMERR error to the sender. % AUTH_NOTIFY_QUESTIONS invalid number of questions (%1) in incoming NOTIFY This debug message is logged by the authoritative server when it receives a NOTIFY packet that contains zero or more than one question. (A valid NOTIFY packet contains one question.) The server will return a FORMERR error to the sender. % AUTH_PACKET_PARSE_ERROR unable to parse received DNS packet: %1 This is a debug message, generated by the authoritative server when an attempt to parse a received DNS packet has failed due to something other than a protocol error. The reason for the failure is given in the message; the server will return a SERVFAIL error code to the sender. % AUTH_PACKET_PROTOCOL_ERROR DNS packet protocol error: %1. Returning %2 This is a debug message, generated by the authoritative server when an attempt to parse a received DNS packet has failed due to a protocol error. The reason for the failure is given in the message, as is the error code that will be returned to the sender. % AUTH_PACKET_RECEIVED message received:\n%1 This is a debug message output by the authoritative server when it receives a valid DNS packet. Note: This message includes the packet received, rendered in the form of multiple lines of text. For this reason, it is suggested that this log message not be routed to the syslog file, where the multiple lines could confuse programs that expect a format of one message per line. % AUTH_PROCESS_FAIL message processing failure: %1 This message is generated by the authoritative server when it has encountered an internal error whilst processing a received packet: the cause of the error is included in the message. The server will return a SERVFAIL error code to the sender of the packet. This message indicates a potential error in the server. Please open a bug ticket for this issue. % AUTH_RECEIVED_COMMAND command '%1' received This is a debug message issued when the authoritative server has received a command on the command channel. % AUTH_RECEIVED_SENDSTATS command 'sendstats' received This is a debug message issued when the authoritative server has received a command from the statistics module to send it data. The 'sendstats' command is handled differently to other commands, which is why the debug message associated with it has its own code. % AUTH_RESPONSE_RECEIVED received response message, ignoring This is a debug message, this is output if the authoritative server receives a DNS packet with the QR bit set, i.e. a DNS response. The server ignores the packet as it only responds to question packets. % AUTH_SEND_ERROR_RESPONSE sending an error response (%1 bytes):\n%2 This is a debug message recording that the authoritative server is sending an error response to the originator of the query. A previous message will have recorded details of the failure. Note: This message includes the packet sent, rendered in the form of multiple lines of text. For this reason, it is suggested that this log message not be routed to the syslog file, where the multiple lines could confuse programs that expect a format of one message per line. % AUTH_SEND_NORMAL_RESPONSE sending an error response (%1 bytes):\n%2 This is a debug message recording that the authoritative server is sending a response to the originator of a query. Note: This message includes the packet sent, rendered in the form of multiple lines of text. For this reason, it is suggested that this log message not be routed to the syslog file, where the multiple lines could confuse programs that expect a format of one message per line. % AUTH_SERVER_CREATED server created An informational message indicating that the authoritative server process has been created and is initializing. The AUTH_SERVER_STARTED message will be output when initialization has successfully completed and the server starts accepting queries. % AUTH_SERVER_FAILED server failed: %1 The authoritative server has encountered a fatal error and is terminating. The reason for the failure is included in the message. % AUTH_SERVER_STARTED server started Initialization of the authoritative server has completed successfully and it is entering the main loop, waiting for queries to arrive. % AUTH_SQLITE3 nothing to do for loading sqlite3 This is a debug message indicating that the authoritative server has found that the data source it is loading is an SQLite3 data source, so no further validation is needed. % AUTH_STATS_CHANNEL_CREATED STATS session channel created This is a debug message indicating that the authoritative server has created a channel to the statistics process. It is issued during server startup is an indication that the initialization is proceeding normally. % AUTH_STATS_CHANNEL_ESTABLISHED STATS session channel established This is a debug message indicating that the authoritative server has established communication over the previously created statistics channel. It is issued during server startup is an indication that the initialization is proceeding normally. % AUTH_STATS_COMMS communication error in sending statistics data: %1 An error was encountered when the authoritative server tried to send data to the statistics daemon. The message includes additional information describing the reason for the failure. % AUTH_STATS_TIMEOUT timeout while sending statistics data: %1 The authoritative server sent data to the statistics daemon but received no acknowledgement within the specified time. The message includes additional information describing the reason for the failure. % AUTH_STATS_TIMER_DISABLED statistics timer has been disabled This is a debug message indicating that the statistics timer has been disabled in the authoritative server and no statistics information is being produced. % AUTH_STATS_TIMER_SET statistics timer set to %1 second(s) This is a debug message indicating that the statistics timer has been enabled and that the authoritative server will produce statistics data at the specified interval. % AUTH_UNSUPPORTED_OPCODE unsupported opcode: %1 This is a debug message, produced when a received DNS packet being processed by the authoritative server has been found to contain an unsupported opcode. (The opcode is included in the message.) The server will return an error code of NOTIMPL to the sender. % AUTH_XFRIN_CHANNEL_CREATED XFRIN session channel created This is a debug message indicating that the authoritative server has created a channel to the XFRIN (Transfer-in) process. It is issued during server startup is an indication that the initialization is proceeding normally. % AUTH_XFRIN_CHANNEL_ESTABLISHED XFRIN session channel established This is a debug message indicating that the authoritative server has established communication over the previously-created channel to the XFRIN (Transfer-in) process. It is issued during server startup is an indication that the initialization is proceeding normally. % AUTH_ZONEMGR_COMMS error communicating with zone manager: %1 This is a debug message output during the processing of a NOTIFY request. An error (listed in the message) has been encountered whilst communicating with the zone manager. The NOTIFY request will not be honored. % AUTH_ZONEMGR_ERROR received error response from zone manager: %1 This is a debug message output during the processing of a NOTIFY request. The zone manager component has been informed of the request, but has returned an error response (which is included in the message). The NOTIFY request will not be honored. % AUTH_INVALID_STATISTICS_DATA invalid specification of statistics data specified An error was encountered when the authoritiative server specified statistics data which is invalid for the auth specification file.