# This is an example configuration file for DHCPv6 server in Kea.
# It demonstrates simple configuration of the options for a subnet.

{ "Dhcp6":

{
# Kea is told to listen on ethX interface only.
  "interfaces-config": {
    "interfaces": [ "ethX" ]
  },

# We need to specify the the database used to store leases. As of
# September 2016, four database backends are supported: MySQL,
# PostgreSQL, Cassandra, and the in-memory database, Memfile.
# We'll use memfile  because it doesn't require any prior set up.
  "lease-database": {
    "type": "memfile"
  },

# Addresses will be assigned with preferred and valid lifetimes
# being 3000 and 4000, respectively. Client is told to start
# renewing after 1000 seconds. If the server does not respond
# after 2000 seconds since the lease was granted, client is supposed
# to start REBIND procedure (emergency renewal that allows switching
# to a different server).
  "preferred-lifetime": 3000,
  "valid-lifetime": 4000,
  "renew-timer": 1000,
  "rebind-timer": 2000,

# Defining a subnet. There are 2 DHCP options returned to the
# clients connected to this subnet. The first option is identified
# by the name. The second option is identified by the code.
# There are two address pools defined within this subnet. Pool
# specific value for option 12 is defined for the pool:
# 2001:db8:1::1 - 2001:db8:1::100. Clients obtaining an address
# from this pool will be assigned option 12 with a value of
# 3001:cafe::21. Clients belonging to this subnet but obtaining
# addresses from the other pool, or the clients obtaining
# stateless configuration will be assigned subnet specific value
# of option 12, i.e. 2001:db8:1:0:ff00::1.
  "subnet6": [
    {
      "option-data": [
        {
            "name": "dns-servers",
            "data": "2001:db8:2::45, 2001:db8:2::100"
        },
        {
            "code": 12,
            "data": "2001:db8:1:0:ff00::1"
        }
      ],
      "pools": [
        {
            "pool": "2001:db8:1::1 - 2001:db8:1::100",
            "option-data": [
              {
                  "code": 12,
                  "data": "3001:cafe::21"
              }
            ]
        },
        {
            "pool": "2001:db8:1::500 - 2001:db8:2::1000"
        }
      ],
      "subnet": "2001:db8:1::/64",
      "interface": "ethX"
    }
  ]
},

# The following configures logging. It assumes that messages with at least
# informational level (info, warn, error and fatal) should be logged to stdout.
"Logging": {
    "loggers": [
        {
            "name": "kea-dhcp6",
            "output_options": [
                {
                    "output": "stdout"
                }
            ],
            "debuglevel": 0,
            "severity": "INFO"
        }
    ]
}

}