# This file may be used a template for constructing DHCP-DDNS JSON
# configuration.
#
# Default values that may be omitted are '#' commented out.

# If in a file by itself, it must start with a left-curly-bracket.
{

"DhcpDdns" :
{
#
# --------------  Global Parameters ----------------
#
#    All of the global parameters have default values as shown.  If these
#    are satisfactory you may omit them.
#
#    "ip-address" : "127.0.0.1",
#    "port" : 53001,
#    "dns-server-timeout" : 100,
#    "ncr-protocol" : "UDP"
#    "ncr-format" : "JSON"

#
# ----------------- Forward DDNS  ------------------
#
    "forward-ddns" :
    {
        "ddns-domains" :
        [
            {
                "name" : "<zone name 1>",
#                "key-name" : "<key name>",
                "dns-servers" :
                [
                    {
                        "ip-address" : "<ip address>"
#                       ,"port" : 53
                    }
#                   ,
#                   {
#                       next DNS server for this DdnsDomain
#                   }
#                   :
                ]
            }
#           ,
#           {
#                next Forward DdnsDomain
#           }
#           :
        ]
    },

#
# ----------------- Reverse DDNS  ------------------
#
    "reverse-ddns" :
    {
        "ddns-domains" :
        [
            {
                "name" : "<reverse zone name 1>",
#                "key-name" : "<key name>",
                "dns-servers" :
                [
                    {
                        "ip-address" : "<ip address>"
#                        ,"port" : 53
                    }
#                   ,
#                   {
#                       next DNS server for this DdnsDomain
#                   }
#                   :
                ]
            }
#           ,
#           {
#                next Reverse DdnsDomain
#           }
#           :
        ]
    },
#
# ------------------ TSIG keys ---------------------
#
    "tsig-keys" :
    [
        {
            "name" : "<key name>",
            "algorithm" : "<algorithm name>",
#            Valid values for algorithm are:    HMAC-MD5, HMAC-SHA1,
#                                               HMAC-SHA224, HMAC-SHA256,
#                                               HMAC-SHA384, HMAC-SHA512
#           "digest-bits" : 256,
#           Minimum truncated length in bits.
#           Default 0 (means truncation is forbidden).
            "secret" : "<shared secret value>"
        }
#       ,
#        {
#                next TSIG Key
#        }
    ]
}

# If in a file by itself, it must end with an right-curly-bracket.
}