# This is an example configuration file for DHCPv6 server in Kea.
# It demonstrates how user can specify values for Softwire options
# defined in RFC 7598 for Lightweight 4over6 architecture.

{ "Dhcp6":

{
# Kea is told to listen on ethX interface only.
  "interfaces-config": {
    "interfaces": [ "ethX" ]
  },

# Let's use a Memfile backend to store leases.
  "lease-database": {
    "type": "memfile"
  },

# Addresses will be assigned with preferred and valid lifetimes
# being 3000 and 4000, respectively. Client is told to start
# renewing after 1000 seconds. If the server does not respond
# after 2000 seconds since the lease was granted, client is supposed
# to start REBIND procedure (emergency renewal that allows switching
# to a different server).
  "preferred-lifetime": 3000,
  "valid-lifetime": 4000,
  "renew-timer": 1000,
  "rebind-timer": 2000,

# The following list defines subnets. Each subnet consists of at
# least subnet and pool entries.
  "subnet6": [
    {
      "pools": [ { "pool": "2001:db8:1::/80" } ],
      "subnet": "2001:db8:1::/64",
      "interface": "ethX",
# Include MAP-E Container option for hosts connected to this subnet.
      "option-data": [
        {
            "name": "s46-cont-mape"
        }
      ],
# Send host specific softwire options.
      "reservations": [
        {
            "duid": "01:02:03:04:05:06:07:08:09:0A",
            "option-data": [
# These two options will be included in the MAP-E Container
              {
                "space": "s46-cont-mape-options",
                "name": "s46-rule",
                "data": "1, 0, 24, 192.0.2.0, 2001:db8:1::/64"
              },
              {
                "space": "s46-cont-mape-options",
                "name": "s46-br",
                "data": "2001:db8:cafe::1"
              },
# This option will be included in the S46 Rule option. It includes
# PSID/PSID length value in a user friendly form. The PSID length
# specifies the number of bits on which PSID is coded. The PSID
# value 3 is a 4th value that is coded on these 4 bits: "0011b".
              {
                "space": "s46-rule-options",
                "name": "s46-portparams",
                "data": "0, 3/4"
              }
            ]
        }
      ]
    }
  ]
},

# The following configures logging. Kea will log all debug messages
# to /var/log/kea-debug.log file.
"Logging": {
    "loggers": [
        {
            "name": "kea-dhcp6",
            "output_options": [
                {
                    "output": "/var/log/kea-debug.log"
                }
            ],
            "debuglevel": 99,
            "severity": "DEBUG"
        }
    ]
}

}