// Copyright (C) 2015-2016 Internet Systems Consortium, Inc. ("ISC") // // This Source Code Form is subject to the terms of the Mozilla Public // License, v. 2.0. If a copy of the MPL was not distributed with this // file, You can obtain one at http://mozilla.org/MPL/2.0/. /** @page unitTests Building Kea with Unit Tests @section unitTestsIntroduction Introduction Kea uses the Google C++ Testing Framework (also called googletest or gtest) as a base for our C++ unit-tests. See https://github.com/google/googletest for details. We used to have Python unit-tests inherited from BIND10 days but have been removed, so please do not write any new Kea unit tests in Python. If you want to write DHCP tests in Python, we encourage you to take a look at ISC Forge: http://kea.isc.org/wiki/IscForge . You must have \c gtest installed or at least extracted in a directory before compiling Kea unit-tests. To enable unit-tests in Kea, use: @code ./configure --with-gtest=/path/to/your/gtest/dir @endcode or @code ./configure --with-gtest-source=/path/to/your/gtest/dir @endcode Depending on how you compiled or installed \c gtest (e.g. from sources or using some package management system) one of those two switches will find \c gtest. After that you make and run the unit-tests with: @code make check @endcode @section unitTestsEnvironmentVariables Environment Variables The following environment variable can affect the unit tests: - KEA_LOCKFILE_DIR - Specifies a directory where the logging system should create its lock file. If not specified, it is prefix/var/run/kea, where prefix defaults to /usr/local. This variable must not end with a slash. There is one special value, "none", which instructs Kea to not create a lock file at all. This may cause issues if several processes log to the same file. (Also see the Kea User's Guide, section 15.3.) - KEA_LOGGER_DESTINATION - Specifies the logging destination. If not set, logged messages will not be recorded anywhere. There are three special values: stdout, stderr and syslog. Any other value is interpreted as a filename. (Also see Kea User's Guide, section 15.3.) - KEA_PIDFILE_DIR - Specifies the directory which should be used for PID files as used by dhcp::Daemon or its derivatives. If not specified, the default is prefix/var/run/kea, where prefix defaults to /usr/local. This variable must not end with a slash. - KEA_SOCKET_TEST_DIR - if set, it specifies the directory where Unix sockets are created. There is an operating system limitation on how long a Unix socket path can be, typically slightly over 100 characters. If you happen to build and run unit-tests in deeply nested directories, this may become a problem. KEA_SOCKET_TEST_DIR can be specified to instruct unit-test to use a different directory. It must not end with slash. @section unitTestsDatabaseConfig Databases Configuration for Unit Tests With the use of databases requiring separate authorisation, there are certain database-specific pre-requisites for successfully running the unit tests. These are listed in the following sections. @subsection unitTestsDatabaseUsers Database Users Required for Unit Tests Unit tests validating database backends require that the keatest database is created. This database should be empty. The unit tests also require that the keatest user is created and that this user is configured to access the database with a password of keatest. Unit tests use these credentials to create database schema, run test cases and drop the schema. Thus, the keatest user must have sufficiently high privileges to create and drop tables, as well as insert and modify the data within those tables. The database backends which support read only access to the host reservations databases (currently MySQL and PostgreSQL) include unit tests verifying that a database user with read-only privileges can be used to retrieve host reservations. Those tests require another user, keatest_readonly, with SQL SELECT privilege to the keatest database (i.e. without INSERT, UPDATE etc.), is also created. keatest_readonly should also have the password keatest. The following sections provide step-by-step guidelines how to setup the databases for running unit tests. @subsection mysqlUnitTestsPrerequisites MySQL Database The steps to create the database and users are: -# Log into MySQL as root: @verbatim % mysql -u root -p Enter password: : mysql>@endverbatim\n -# Create the test database. This must be called "keatest": @verbatim mysql> CREATE DATABASE keatest; mysql>@endverbatim\n -# Create the users under which the test client will connect to the database (the apostrophes around the words keatest, keatest_readonly, and localhost are required): @verbatim mysql> CREATE USER 'keatest'@'localhost' IDENTIFIED BY 'keatest'; mysql> CREATE USER 'keatest_readonly'@'localhost' IDENTIFIED BY 'keatest'; mysql>@endverbatim\n -# Grant the created users permissions to access the keatest database (again, the apostrophes around the user names and localhost are required): @verbatim mysql> GRANT ALL ON keatest.* TO 'keatest'@'localhost'; mysql> GRANT SELECT ON keatest.* TO 'keatest_readonly'@'localhost'; mysql>@endverbatim\n -# Exit MySQL: @verbatim mysql> quit Bye %@endverbatim The unit tests are run automatically when "make check" is executed (providing that Kea has been build with the \c --with-dhcp-mysql switch (see the installation section in the Kea Administrator Reference Manual). @subsection pgsqlUnitTestsPrerequisites PostgreSQL Database PostgreSQL set up differs from system to system. Please consult your operating system-specific PostgreSQL documentation. The remainder of that section uses Ubuntu 13.10 x64 (with PostgreSQL 9.0+) as an example. On Ubuntu, PostgreSQL is installed (with sudo apt-get install postgresql) under user postgres. To create new databases or add new users, initial commands must be issued under this username: @verbatim $ sudo -u postgres psql postgres [sudo] password for thomson: psql (9.1.12) Type "help" for help. postgres=# CREATE USER keatest WITH PASSWORD 'keatest'; CREATE ROLE postgres=# CREATE DATABASE keatest; CREATE DATABASE postgres=# GRANT ALL PRIVILEGES ON DATABASE keatest TO keatest; GRANT postgres=# \q @endverbatim PostgreSQL versions earlier than 9.0 don't provide an SQL statement for granting privileges on all tables in a database. In newer PostgreSQL versions, it is possible to grant specific privileges on all tables within a schema. However, this only affects tables which exist when the privileges are granted. To ensure that the user has specific privileges to tables dynamically created by the unit tests, the default schema privileges must be altered. The following example demonstrates how to create the user keatest_readonly, which has SELECT privilege to the tables within the keatest database, in Postgres 9.0+. For earlier versions of Postgres, it is recommended to simply grant full privileges to keatest_readonly, using the same steps as for the keatest user. @verbatim $ psql -U postgres Password for user postgres: psql (9.1.12) Type "help" for help. postgres=# CREATE USER keatest_readonly WITH PASSWORD 'keatest'; CREATE ROLE postgres=# \q $ psql -U keatest Password for user keatest: psql (9.1.12) Type "help" for help. keatest=> ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT SELECT ON TABLES to keatest_readonly; ALTER DEFAULT PRIVILEGES keatest=> \q @endverbatim Note that the keatest user (rather than postgres) is used to grant privileges to the keatest_readonly user. This ensures that the SELECT privilege is granted only on the tables that the keatest user can access within the public schema. Now we should be able to log into the newly created database using both user names: @verbatim $ psql -d keatest -U keatest Password for user keatest: psql (9.1.12) Type "help" for help. keatest=> \q $ psql -d keatest -U keatest_readonly Password for user keatest_readonly: psql (9.1.12) Type "help" for help. keatest=> @endverbatim If instead of seeing keatest=> prompt, your login is refused with an error code about failed peer or indent authentication, it means that PostgreSQL is configured to check unix username and reject login attempts if PostgreSQL names are different. To alter that, the PostgreSQL configuration must be changed - the /etc/postgresql/9.1/main/pg_hba.conf config file has to be altered. (It may be in a different location in your system.) The following lines: @verbatim local all all peer host all all 127.0.0.1/32 md5 host all all ::1/128 md5 @endverbatim need to be replaced with: @verbatim local all all password host all all 127.0.0.1/32 password host all all ::1/128 password @endverbatim Another possible problem is that you get no password prompt. This is most probably because you have no pg_hba.conf config file and everybody is by default trusted. As it has a very bad effect on the security you should have been warned this is a highly unsafe configuration. The solution is the same, i.e., require password or md5 authentication method. If you lose the postgres user access you can first add: @verbatim local all postgres trust @endverbatim to trust only the local postgres user. Note the postgres user can be pgsql on some systems. Please consult your PostgreSQL user manual before applying those changes as those changes may expose your other databases that you run on the same system. In general case, it is a poor idea to run anything of value on a system that runs tests. Use caution! The unit tests are run automatically when "make check" is executed (providing that Kea has been build with the \c --with-dhcp-pgsql switch (see the installation section in the Kea Administrator Reference Manual). @subsection cqlUnitTestsPrerequisites Cassandra database @todo: Describe steps necessary to set up Cassandra database suitable for running unittests. */