kea/doc/examples/kea4/advanced.json

// This is an example configuration file for DHCPv4 server in Kea.
// It covers some of the more advanced features. This file may not be coherent
// as its main purpose is to demonstrate the features. They don't necessarily
// have to make sense used together.

// The new parser supports 3 comment styles:

// This is C++ style.

# This is a bash style.

/* This is a C style comment. */

/* C style comment
   can span
   multiple lines */

{ "Dhcp4":

{
    // Kea is told to listen on ethX interface only.
    "interfaces-config": {
        "interfaces": [ "ethX" ],

        // This specifies what type of socket Kea uses. Currently supported
        // are 'raw' (which is the default) and 'udp'. Raw has the benefit
        // of receiving all traffic every time and a downside of bypassing
        // all firewall rules and having marginally bigger performance impact.
        // 'udp' is generally better if you have only relayed traffic. Kea
        // than opens up normal UDP socket and the kernel does all the
        // Ethernet/IP stack processing.
        "dhcp-socket-type": "udp",

        // This makes interfaces to be re-detected at each (re-)configuration.
        // By default it is true.
        "re-detect": true
    },

    // We need to specify the the database used to store leases. As of
    // September 2016, four database backends are supported: MySQL,
    // PostgreSQL, Cassandra, and the in-memory database, Memfile.
    // We'll use memfile  because it doesn't require any prior set up.
    // For memfile, it's important to always specify lfc-interval, so
    // the lease file would not grow without bounds and be sanitized
    // once per hour.
    "lease-database": {
        "type": "memfile",
        "lfc-interval": 3600
    },

    // This defines a control socket. If defined, Kea will open a UNIX socket
    // and will listen for incoming commands. See section 15 of the Kea User's
    // Guide for list of supported commands.
    "control-socket": {
        "socket-type": "unix",
        "socket-name": "/tmp/kea4-ctrl-socket"
    },

    // Addresses will be assigned with a lifetime of 4000 seconds.
    // The client is told to start renewing after 1000 seconds. If the server
    // does not respond within 2000 seconds of the lease being granted, client
    // is supposed to start REBIND procedure (emergency renewal that allows
    // switching to a different server).
    "valid-lifetime": 4000,
    "renew-timer": 1000,
    "rebind-timer": 2000,

    // RFC6842 says that the server is supposed to echo back client-id option.
    // However, some older clients do not support this and are getting confused
    // when they get their own client-id. Kea can disable RFC6842 support.
    "echo-client-id": false,

    // Some clients don't use stable client identifier, but rather
    // generate them during each boot. This may cause a client that
    // reboots frequently to get multiple leases, which may not be
    // desirable. As such, sometimes admins prefer to tell their DHCPv4
    // server to ignore client-id value altogether and rely exclusively
    // on MAC address. This is a parameter that is defined globally, but
    // can be overridden on a subnet level.
    "match-client-id": true,

    // The following list defines subnets. Each subnet consists of at
    // least subnet and pool entries.
    "subnet4": [
        {
            "pools": [ { "pool":  "192.0.2.1 - 192.0.2.200" } ],
            "subnet": "192.0.2.0/24"
        },
        {
            // This particular subnet has match-client-id value changed.
            // This causes Kea to ignore client-id values in this subnet
            // and rely exclusively on MAC addresses.
            "pools": [ { "pool": "192.0.3.100 - 192.0.3.200" } ],
            "subnet": "192.0.3.0/24",
            "match-client-id": false
        },
        {
            "pools": [ { "pool": "192.0.4.1 - 192.0.4.254" } ],
            "subnet": "192.0.4.0/24",

            // Sometimes the relay may use an IPv4 address that does
            // not match the subnet. This is discouraged, but there are
            // valid cases when it makes sense. One case is when there
            // is a shared subnet.
            "relay": {
                "ip-address": "192.168.1.1"
            }
        }
    ]
},

  // The following configures logging. It assumes that messages with
  // at least informational level (info, warn, error and fatal) should
  // be logged to stdout.
  "Logging": {
      "loggers": [
          {
            "name": "kea-dhcp4",
              "output_options": [
                  {
                      "output": "stdout",
                      // Several additional parameters are possible in addition
                      // to the typical output. Flush determines whether logger
                      // flushes output to a file. Maxsize determines maximum
                      // filesize before the file is being rotated. maxver
                      // specifies the maximum number of rotated files being
                      // kept.
                      "flush": true,
                      "maxsize": 204800,
                      "maxver": 4
                  }
              ],
              "severity": "INFO"
          }
      ]
  }

}