kea/ChangeLog

296.	[build]		jreed
	Do not install the unittest libraries. At this time, they
	are not useful without source tree (and they may or may
	not have googletest support). Also, convert several makefiles
	to build tests at "check" time and not build time.
	(Trac #1091, git TODO)

295.	[bug]		jinmei
	__init__.py for isc.dns was installed in the wrong directory,
	which would now make xfrin fail to start.  It was also bad
	in that it replaced any existing __init__.py in th public
	site-packages directory.  After applying this fix You may want to
	check if the wrong init file is in the wrong place, in which
	case it should be removed.
	(Trac #1285, git af3b17472694f58b3d6a56d0baf64601b0f6a6a1)

294.	[func]		jelte, jinmei, vorner
	b10-xfrin now supports incoming IXFR.  See BIND 10 Guide for
	how to configure it and operational notes.
	(Trac #1212, multiple git merges)

293.    [func]*		tomek
	b10-dhcp6: Implemented DHCPv6 echo server. It joins DHCPv6
	multicast groups and listens to incoming DHCPv6 client messages.
	Received messages are then echoed back to clients. This
	functionality is limited, but it can be used to test out client
	resiliency to unexpected messages. Note that network interface
	detection routines are not implemented yet, so interface name
	and its address must be specified in interfaces.txt.
	(Trac #878, git 3b1a604abf5709bfda7271fa94213f7d823de69d)

292.	[func]		dvv
	Implement the DLV rrtype according to RFC4431.
	(Trac #1144, git d267c0511a07c41cd92e3b0b9ee9bf693743a7cf)

291.    [func]          naokikambe
	Statistics items are specified by each module's spec file.
	Stats module can read these through the config manager. Stats
	module and stats httpd report statistics data and statistics
	schema by each module via both bindctl and HTTP/XML.
	(Trac #928,#929,#930,#1175, git 054699635affd9c9ecbe7a108d880829f3ba229e)

290.	[func]		jinmei
	libdns++/pydnspp: added an option parameter to the "from wire"
	methods of the Message class.  One option is defined,
	PRESERVE_ORDER, which specifies the parser to handle each RR
	separately, preserving the order, and constructs RRsets in the
	message sections so that each RRset contains only one RR.
	(Trac #1258, git c874cb056e2a5e656165f3c160e1b34ccfe8b302)

289.	[func]*		jinmei
	b10-xfrout: ACLs for xfrout can now be configured per zone basis.
	A per zone ACl is part of a more general zone configuration.  A
	quick example for configuring an ACL for zone "example.com" that
	rejects any transfer request for that zone is as follows:
	> config add Xfrout/zone_config
	> config set Xfrout/zone_config[0]/origin "example.com"
	> config add Xfrout/zone_config[0]/transfer_acl
	> config set Xfrout/zone_config[0]/transfer_acl[0] {"action": "REJECT"}
	The previous global ACL (query_acl) was renamed to transfer_acl,
	which now works as the default ACL.  Note: backward compatibility
	is not provided, so an existing configuration using query_acl
	needs to be updated by hand.
	Note: the per zone configuration framework is a temporary
	workaround.  It will eventually be redesigned as a system wide
	configuration.
	(Trac #1165, git 698176eccd5d55759fe9448b2c249717c932ac31)

288.    [bug]		stephen
	Fixed problem whereby the order in which component files appeared in
	rdataclass.cc was system dependent, leading to problems on some
	systems where data types were used before the header file in which
	they were declared was included.
	(Trac #1202, git 4a605525cda67bea8c43ca8b3eae6e6749797450)

287.	[bug]*		jinmei
	Python script files for log messages (xxx_messages.py) should have
	been installed under the "isc" package.  This fix itself should
	be a transparent change without affecting existing configurations
	or other operational practices, but you may want to clean up the
	python files from the common directly (such as "site-packages").
	(Trac #1101, git 0eb576518f81c3758c7dbaa2522bd8302b1836b3)

286.    [func]		ocean
	libdns++: Implement the HINFO rrtype support according to RFC1034,
	and RFC1035.
	(Trac #1112, git 12d62d54d33fbb1572a1aa3089b0d547d02924aa)

285.	[bug]		jelte
	sqlite3 data source: fixed a race condition on initial startup,
	when the database has not been initialized yet, and multiple
	processes are trying to do so, resulting in one of them failing.
	(Trac #326, git 5de6f9658f745e05361242042afd518b444d7466)

284.	[bug]		jerry
	b10-zonemgr: zonemgr will not terminate on empty zones, it will
	log a warning and try to do zone transfer for them.
	(Trac #1153, git 0a39659638fc68f60b95b102968d7d0ad75443ea)

283.    [bug]		zhanglikun
	Make stats and boss processes wait for answer messages from each
	other in block mode to avoid orphan answer messages, add an internal
	command "getstats" to boss process for getting statistics data from
	boss.
	(Trac #519, git 67d8e93028e014f644868fede3570abb28e5fb43)

282.    [func]		ocean
	libdns++: Implement the NAPTR rrtype according to RFC2915,
	RFC2168 and RFC3403.
	(Trac #1130, git 01d8d0f13289ecdf9996d6d5d26ac0d43e30549c)

bind10-devel-20110819 released on August 19, 2011

281.	[func]		jelte
	Added a new type for configuration data: "named set". This allows for
	similar configuration as the current "list" type, but with strings
	instead of indices as identifiers. The intended use is for instance
	/foo/zones/example.org/bar instead of /foo/zones[2]/bar. Currently
	this new type is not in use yet.
	(Trac #926, git 06aeefc4787c82db7f5443651f099c5af47bd4d6)

280.	[func]		jerry
	libdns++: Implement the MINFO rrtype according to RFC1035.
	(Trac #1113, git 7a9a19d6431df02d48a7bc9de44f08d9450d3a37)

279.	[func]		jerry
	libdns++: Implement the AFSDB rrtype according to RFC1183.
	(Trac #1114, git ce052cd92cd128ea3db5a8f154bd151956c2920c)

278.	[doc]		jelte
	Add logging configuration documentation to the guide.
	(Trac #1011, git 2cc500af0929c1f268aeb6f8480bc428af70f4c4)

277.	[func]		jerry
	libdns++: Implement the SRV rrtype according to RFC2782.
	(Trac #1128, git 5fd94aa027828c50e63ae1073d9d6708e0a9c223)

276.	[func]		stephen
	Although the top-level loggers are named after the program (e.g.
	b10-auth, b10-resolver), allow the logger configuration to omit the
	"b10-" prefix and use just the module name.
	(Trac #1003, git a01cd4ac5a68a1749593600c0f338620511cae2d)

275.	[func]		jinmei
	Added support for TSIG key matching in ACLs.  The xfrout ACL can
	now refer to TSIG key names using the "key" attribute.  For
	example, the following specifies an ACL that allows zone transfer
	if and only if the request is signed with a TSIG of a key name
	"key.example":
	> config set Xfrout/query_acl[0] {"action": "ACCEPT", \
	                                  "key": "key.example"}
	(Trac #1104, git 9b2e89cabb6191db86f88ee717f7abc4171fa979)

274.	[bug]		naokikambe
	add unittests for functions xml_handler, xsd_handler and xsl_handler
	respectively to make sure their behaviors are correct, regardless of
	whether type which xml.etree.ElementTree.tostring() after Python3.2
	returns is str or byte.
	(Trac #1021, git 486bf91e0ecc5fbecfe637e1e75ebe373d42509b)

273.	[func]		vorner
	It is possible to specify ACL for the xfrout module. It is in the ACL
	configuration key and has the usual ACL syntax. It currently supports
	only the source address. Default ACL accepts everything.
	(Trac #772, git 50070c824270d5da1db0b716db73b726d458e9f7)

272.	[func]		jinmei
	libdns++/pydnspp: TSIG signing now handles truncated DNS messages
	(i.e. with TC bit on) with TSIG correctly.
	(Trac #910, 8e00f359e81c3cb03c5075710ead0f87f87e3220)

271.	[func]		stephen
	Default logging for unit tests changed to severity DEBUG (level 99)
	with the output routed to /dev/null.  This can be altered by setting
	the B10_LOGGER_XXX environment variables.
	(Trac #1024, git 72a0beb8dfe85b303f546d09986461886fe7a3d8)

270.	[func]		jinmei
	Added python bindings for ACLs using the DNS request as the
	context.  They are accessible via the isc.acl.dns module.
	(Trac #983, git c24553e21fe01121a42e2136d0a1230d75812b27)

269.	[bug]		y-aharen
	Modified IntervalTimerTest not to rely on the accuracy of the timer.
	This fix addresses occasional failure of build tests.
	(Trac #1016, git 090c4c5abac33b2b28d7bdcf3039005a014f9c5b)

268.	[func]		stephen
	Add environment variable to allow redirection of logging output during
	unit tests.
	(Trac #1071, git 05164f9d61006869233b498d248486b4307ea8b6)

bind10-devel-20110705 released on July 05, 2011

267.	[func]		tomek
	Added a dummy module for DHCP6. This module does not actually
	do anything at this point, and BIND 10 has no option for
	starting it yet. It is included as a base for further
	development.
	(Trac #990, git 4a590df96a1b1d373e87f1f56edaceccb95f267d)

266.	[func]		Multiple developers
        Convert various error messages, debugging and other output
        to the new logging interface, including for b10-resolver,
        the resolver library, the CC library, b10-auth, b10-cfgmgr,
        b10-xfrin, and b10-xfrout. This includes a lot of new
        documentation describing the new log messages.
        (Trac #738, #739, #742, #746, #759, #761, #762)

265.	[func]*		jinmei
	b10-resolver: Introduced ACL on incoming queries.  By default the
	resolver accepts queries from ::1 and 127.0.0.1 and rejects all
	others.  The ACL can be configured with bindctl via the
	"Resolver/query_acl" parameter.  For example, to accept queries
	from 192.0.2.0/24 (in addition to the default list), do this:
	> config add Resolver/query_acl
	> config set Resolver/query_acl[2]/action "ACCEPT"
	> config set Resolver/query_acl[2]/from "192.0.2.0/24"
	> config commit
	(Trac #999, git e0744372924442ec75809d3964e917680c57a2ce,
	also based on other ACL related work done by stephen and vorner)

264.	[bug]		jerry
	b10-xfrout: fixed a busy loop in its notify-out subthread.  Due to
	the loop, the thread previously woke up every 0.5 seconds throughout
	most of the lifetime of b10-xfrout, wasting the corresponding CPU
	time.
	(Trac #1001, git fb993ba8c52dca4a3a261e319ed095e5af8db15a)

263.	[func]		jelte
	Logging configuration can now also accept a * as a first-level
	name (e.g. '*', or '*.cache'), indicating that every module
	should use that configuration, unless overridden by an explicit
	logging configuration for that module
	(Trac #1004, git 0fad7d4a8557741f953eda9fed1d351a3d9dc5ef)

262.	[func]		stephen
	Add some initial documentation about the logging framework.
	Provide BIND 10 Messages Manual in HTML and DocBook? XML formats.
	This provides all the log message descriptions in a single document.
	A developer tool, tools/system_messages.py (available in git repo),
	was written to generate this.
	(Trac #1012, git 502100d7b9cd9d2300e78826a3bddd024ef38a74)

261.	[func]		stephen
	Add new-style logging messages to b10-auth.
	(Trac #738, git c021505a1a0d6ecb15a8fd1592b94baff6d115f4)

260.	[func]		stephen
	Remove comma between message identification and the message
	text in the new-style logging messages.
	(Trac #1031, git 1c7930a7ba19706d388e4f8dcf2a55a886b74cd2)

259.	[bug]		stephen
	Logging now correctly initialized in b10-auth.  Also, fixed
	bug whereby querying for "version.bind txt ch" would cause
	b10-auth to crash if BIND 10 was started with the "-v" switch.
	(Trac #1022,#1023, git 926a65fa08617be677a93e9e388df0f229b01067)

258.	[build]		jelte
	Now builds and runs with Python 3.2
	(Trac #710, git dae1d2e24f993e1eef9ab429326652f40a006dfb)

257.	[bug]		y-aharen
	Fixed a bug an instance of IntervalTimerImpl may be destructed 
	while deadline_timer is holding the handler. This fix addresses
	occasional failure of IntervalTimerTest.destructIntervalTimer.
	(Trac #957, git e59c215e14b5718f62699ec32514453b983ff603)

256.	[bug]		jerry
	src/bin/xfrin: update xfrin to check TSIG before other part of
	incoming message.
	(Trac #955, git 261450e93af0b0406178e9ef121f81e721e0855c)

255.	[func]		zhang likun
	src/lib/cache:  remove empty code in lib/cache and the corresponding
	suppression rule in	src/cppcheck-suppress.lst.
	(Trac #639, git 4f714bac4547d0a025afd314c309ca5cb603e212)

254.	[bug]		jinmei
	b10-xfrout: failed to send notifies over IPv6 correctly.
	(Trac #964, git 3255c92714737bb461fb67012376788530f16e40)

253.	[func]		jelte
	Add configuration options for logging through the virtual module
	Logging.
	(Trac #736, git 9fa2a95177265905408c51d13c96e752b14a0824)

252.	[func]		stephen
	Add syslog as destination for logging.
	(Trac #976, git 31a30f5485859fd3df2839fc309d836e3206546e)

251.	[bug]*		jinmei
	Make sure bindctl private files are non readable to anyone except
	the owner or users in the same group.  Note that if BIND 10 is run
	with changing the user, this change means that the file owner or
	group will have to be adjusted.  Also note that this change is
	only effective for a fresh install; if these files already exist,
	their permissions must be adjusted by hand (if necessary).
	(Trac #870, git 461fc3cb6ebabc9f3fa5213749956467a14ebfd4)

250.	[bug]		ocean
	src/lib/util/encode, in some conditions, the DecodeNormalizer's
	iterator may reach the end() and when later being dereferenced
	it will cause crash on some platform.
	(Trac #838, git 83e33ec80c0c6485d8b116b13045b3488071770f)

249.	[func]		jerry
	xfrout: add support for TSIG verification.
	(Trac #816, git 3b2040e2af2f8139c1c319a2cbc429035d93f217)

248.	[func]		stephen
	Add file and stderr as destinations for logging.
	(Trac #555, git 38b3546867425bd64dbc5920111a843a3330646b)

247.	[func]		jelte
	Upstream queries from the resolver now set EDNS0 buffer size.
	(Trac #834, git 48e10c2530fe52c9bde6197db07674a851aa0f5d)

246.	[func]		stephen
	Implement logging using log4cplus (http://log4cplus.sourceforge.net)
	(Trac #899, git 31d3f525dc01638aecae460cb4bc2040c9e4df10)

245.	[func]		vorner
	Authoritative server can now sign the answers using TSIG
	(configured in tsig_keys/keys, list of strings like
	"name:<base64-secret>:sha1-hmac"). It doesn't use them for
	ACL yet, only verifies them and signs if the request is signed.
	(Trac #875, git fe5e7003544e4e8f18efa7b466a65f336d8c8e4d)

244.	[func]		stephen
	In unit tests, allow the choice of whether unhandled exceptions are
	caught in the unit test program (and details printed) or allowed to
	propagate to the default exception handler.  See the bind10-dev thread
	https://lists.isc.org/pipermail/bind10-dev/2011-January/001867.html
	for more details.
	(Trac #542, git 1aa773d84cd6431aa1483eb34a7f4204949a610f)

243.	[func]*		feng
	Add optional hmac algorithm SHA224/384/812.
	(Trac #782, git 77d792c9d7c1a3f95d3e6a8b721ac79002cd7db1)

bind10-devel-20110519 released on May 19, 2011

242.	[func]		jinmei
	xfrin: added support for TSIG verify.  This change completes TSIG
	support in b10-xfrin.
	(Trac #914, git 78502c021478d97672232015b7df06a7d52e531b)

241.	[func]		jinmei
	pydnspp: added python extension for the TSIG API introduced in
	change 235.
	(Trac #905, git 081891b38f05f9a186814ab7d1cd5c572b8f777f)
	(Trac #915, git 0555ab65d0e43d03b2d40c95d833dd050eea6c23)

240.	[func]*		jelte
	Updated configuration options to Xfrin, so that you can specify
	a master address, port, and TSIG key per zone. Still only one per
	zone at this point, and TSIG keys are (currently) only specified
	by their full string representation. This replaces the
	Xfrin/master_addr, Xfrin/master_port, and short-lived
	Xfrin/tsig_key configurations with a Xfrin/zones list.
	(Trac #811, git 88504d121c5e08fff947b92e698a54d24d14c375)

239.	[bug]		jerry
	src/bin/xfrout: If a zone doesn't have notify slaves (only has
	one apex ns record - the primary master name server) will cause
	b10-xfrout uses 100% of CPU.
	(Trac #684, git d11b5e89203a5340d4e5ca51c4c02db17c33dc1f)

238.	[func]		zhang likun
	Implement the simplest forwarder, which pass everything through
	except QID, port number. The response will not be cached.
	(Trac #598_new, git 8e28187a582820857ef2dae9b13637a3881f13ba)

237.	[bug]		naokikambe
	Resolved that the stats module wasn't configurable in bindctl in
	spite of its having configuration items. The configuration part
	was removed from the original spec file "stats.spec" and was
	placed in a new spec file "stats-schema.spec". Because it means
	definitions of statistics items. The command part is still
	there. Thus stats module currently has no its own configuration,
	and the items in "stats-schema.spec" are neither visible nor
	configurable through bindctl. "stats-schema.spec" is shared with
	stats module and stats-httpd module, and maybe with other
	statistical modules in future. "stats.spec" has own configuration
	and commands of stats module, if it requires.
	(Trac #719, git a234b20dc6617392deb8a1e00eb0eed0ff353c0a)

236.	[func]		jelte
	C++ client side of configuration now uses BIND10 logging system.
	It also has improved error handling when communicating with the
	rest of the system.
	(Trac #743, git 86632c12308c3ed099d75eb828f740c526dd7ec0)

235.	[func]		jinmei
	libdns++: added support for TSIG signing and verification.  It can
	be done using a newly introduced TSIGContext class.
	Note: we temporarily disabled support for truncated signature
	and modified some part of the code introduced in #226 accordingly.
	We plan to fix this pretty soon.
	(Trac #812, git ebe0c4b1e66d359227bdd1bd47395fee7b957f14)
	(Trac #871, git 7c54055c0e47c7a0e36fcfab4b47ff180c0ca8c8)
	(Trac #813, git ffa2f0672084c1f16e5784cdcdd55822f119feaa)
	(Trac #893, git 5aaa6c0f628ed7c2093ecdbac93a2c8cf6c94349)

234.	[func]		jerry
	src/bin/xfrin: update xfrin to use TSIG. Currently it only supports
	sending a signed TSIG request or SOA request.
	(Trac #815, git a892818fb13a1839c82104523cb6cb359c970e88)

233.	[func]		stephen
	Added new-style logging statements to the NSAS code.
	(Trac #745, git ceef68cd1223ae14d8412adbe18af2812ade8c2d)

232.	[func]		stephen
	To facilitate the writing of extended descriptions in
	message files, altered the message file format.  The message
	is now flagged with a "%" as the first non-blank character
	in the line and the lines in the extended description are
	no longer preceded by a "+".
	(Trac #900, git b395258c708b49a5da8d0cffcb48d83294354ba3)

231.	[func]*		vorner
    The logging interface changed slightly. We use
	logger.foo(MESSAGE_ID).arg(bar); instead of logger.foo(MESSAGE_ID,
	bar); internally. The message definitions use '%1,%2,...'
	instead of '%s,%d', which allows us to cope better with
	mismatched placeholders and allows reordering of them in
	case of translation.
	(Trac #901, git 4903410e45670b30d7283f5d69dc28c2069237d6)

230.	[bug]		naokikambe
	Removed too repeated verbose messages in two cases of:
	 - when auth sends statistics data to stats
	 - when stats receives statistics data from other modules
	(Trac #620, git 0ecb807011196eac01f281d40bc7c9d44565b364)

229.	[doc]		jreed
	Add manual page for b10-host.
	(git a437d4e26b81bb07181ff35a625c540703eee845)

228.	[func]*		jreed
	The host tool is renamed to b10-host. While the utility is
	a work in progress, it is expected to now be shipped with
	tarballs. Its initial goal was to be a host(1) clone,
	rewritten in C++ from scratch and using BIND 10's libdns++.
	It now supports the -a (any), -c class, -d (verbose) switches
	and has improved output.
	(Trac #872, git d846851699d5c76937533adf9ff9d948dfd593ca)

227.	[build]		jreed
	Add missing libdns++ rdata files for the distribution (this
	fixes distcheck error). Change three generated libdns++
	headers to "nodist" so they aren't included in the distribution
	(they were mistakenly included in last tarball).

226.	[func]*		jelte
	Introduced an API for cryptographic operations. Currently it only
	supports HMAC, intended for use with TSIG. The current
	implementation uses Botan as the backend library.
	This introduces a new dependency, on Botan.  Currently only Botan
	1.8.x works; older or newer versions don't.
	(Trac #781, git 9df42279a47eb617f586144dce8cce680598558a)

225.	[func]		naokikambe
	Added the HTTP/XML interface (b10-stats-httpd) to the
	statistics feature in BIND 10. b10-stats-httpd is a standalone
	HTTP server and it requests statistics data to the stats
	daemon (b10-stats) and sends it to HTTP clients in XML
	format. Items of the data collected via b10-stats-httpd
	are almost equivalent to ones which are collected via
	bindctl. Since it also can send XSL (Extensible Stylesheet
	Language) document and XSD (XML Schema definition) document,
	XML document is human-friendly to view through web browsers
	and its data types are strictly defined.
	(Trac #547, git 1cbd51919237a6e65983be46e4f5a63d1877b1d3)

224.	[bug]		jinmei
	b10-auth, src/lib/datasrc: inconsistency between the hot spot
	cache and actual data source could cause a crash while query
	processing.  The crash could happen, e.g., when an sqlite3 DB file
	is being updated after a zone transfer while b10-auth handles a
	query using the corresponding sqlite3 data source.
	(Trac #851, git 2463b96680bb3e9a76e50c38a4d7f1d38d810643)

223.	[bug]		feng
	If ip address or port isn't usable for name server, name
	server process won't exist and give end user chance to
	reconfigure them.
	(Trac #775, git 572ac2cf62e18f7eb69d670b890e2a3443bfd6e7)

222.	[bug]*		jerry
	src/lib/zonemgr: Fix a bug that xfrin not checking for new
	copy of zone on startup.  Imposes some random jitters to
	avoid many zones need to do refresh at the same time. This
	removed the Zonemgr/jitter_scope setting and introduced
	Zonemgr/refresh_jitter and Zonemgr/reload_jitter.
	(Trac #387, git 1241ddcffa16285d0a7bb01d6a8526e19fbb70cb)

221.	[func]*		jerry
	src/lib/util: Create C++ utility library.
	(Trac #749, git 084d1285d038d31067f8cdbb058d626acf03566d)

220.	[func]		stephen
	Added the 'badpacket' program for testing; it sends a set of
	(potentially) bad packets to a nameserver and prints the responses.
	(Trac #703, git 1b666838b6c0fe265522b30971e878d9f0d21fde)

219.	[func]		ocean
	src/lib: move some dns related code out of asiolink library to
	asiodns library
	(Trac #751, git 262ac6c6fc61224d54705ed4c700dadb606fcb1c)

218.	[func]		jinmei
	src/lib/dns: added support for RP RDATA.
	(Trac #806, git 4e47d5f6b692c63c907af6681a75024450884a88)

217.	[bug]		jerry
	src/lib/dns/python: Use a signed version of larger size of
	integer and perform more strict range checks with
	PyArg_ParseTuple() in case of overflows.
	(Trac #363, git ce281e646be9f0f273229d94ccd75bf7e08d17cf)

216.	[func]		vorner
	The BIND10_XFROUT_SOCKET_FILE environment variable can be
	used to specify which socket should be used for communication
	between b10-auth and b10-xfrout. Mostly for testing reasons.
	(Trac #615, git 28b01ad5bf72472c824a7b8fc4a8dc394e22e462)

215.	[func]		vorner
	A new process, b10-sockcreator, is added, which will create
	sockets for the rest of the system.  It is the only part
	which will need to keep the root privileges. However, only
	the process exists, nothing can talk to it yet.
	(Trac #366, git b509cbb77d31e388df68dfe52709d6edef93df3f)

214.	[func]*		vorner
	Zone manager no longer thinks it is secondary master for
	all zones in the database. They are listed in
	Zonemgr/secondary_zones configuration variable (in the form
	[{"name": "example.com", "class": "IN"}]).
	(Trac #670, git 7c1e4d5e1e28e556b1d10a8df8d9486971a3f052)

213.	[bug]		naokikambe
	Solved incorrect datetime of "bind10.boot_time" and also
	added a new command "sendstats" for Bob. This command is
	to send statistics data to the stats daemon immediately.
	The solved problem is that statistics data doesn't surely
	reach to the daemon because Bob sent statistics data to
	the daemon while it is starting. So the daemon invokes the
	command for Bob after it starts up. This command is also
	useful for resending statistics data via bindctl manually.
	(Trac #521, git 1c269cbdc76f5dc2baeb43387c4d7ccc6dc863d2)

212.	[bug]		naokikambe
	Fixed that the ModuleCCSession object may group_unsubscribe in the
	closed CC session in being deleted.
	(Trac #698, git 0355bddc92f6df66ef50b920edd6ec3b27920d61)

211.	[func]		shane
	Implement "--brittle" option, which causes the server to exit
	if any of BIND 10's processes dies.
	(Trac #788, git 88c0d241fe05e5ea91b10f046f307177cc2f5bc5)

210.	[bug]		jerry
	src/bin/auth: fixed a bug where type ANY queries don't provide
	additional glue records for ANSWER section.
	(Trac #699, git 510924ebc57def8085cc0e5413deda990b2abeee)

bind10-devel-20110322 released on March 22, 2011

209.	[func]		jelte
	Resolver now uses the NSAS when looking for a nameserver to
	query for any specific zone. This also includes keeping track of
	the RTT for that nameserver.
	(Trac #495, git 76022a7e9f3ff339f0f9f10049aa85e5784d72c5)

208.	[bug]*		jelte
	Resolver now answers REFUSED on queries that are not for class IN.
	This includes the various CH TXT queries, which will be added
	later.
	(git 012f9e78dc611c72ea213f9bd6743172e1a2ca20)

207.	[func]		jelte
	Resolver now starts listening on localhost:53 if no configuration
	is set.
	(Trac #471, git 1960b5becbba05570b9c7adf5129e64338659f07)

206.	[func]		shane
	Add the ability to list the running BIND 10 processes using the
	command channel. To try this, use "Boss show_processes".
	(Trac #648, git 451bbb67c2b5d544db2f7deca4315165245d2b3b)

205.	[bug]		jinmei
	b10-auth, src/lib/datasrc: fixed a bug where b10-auth could return
	an empty additional section for delegation even if some glue is
	crucial when it fails to find some other glue records in its data
	source.
	(Trac #646, git 6070acd1c5b2f7a61574eda4035b93b40aab3e2b)

204.	[bug]		jinmei
	b10-auth, src/lib/datasrc: class ANY queries were not handled
	correctly in the generic data source (mainly for sqlite3).  It
	could crash b10-auth in the worst case, and could result in
	incorrect responses in some other cases.
	(Trac #80, git c65637dd41c8d94399bd3e3cee965b694b633339)

203.	[bug]		zhang likun
	Fix resolver cache memory leak: when cache is destructed, rrset
	and message entries in it are not destructed properly.
	(Trac #643, git aba4c4067da0dc63c97c6356dc3137651755ffce)

202.	[func]		vorner
	It is possible to specify a different directory where we look for
	configuration files (by -p) and different configuration file to
	use (-c).  Also, it is possible to specify the port on which
	cmdctl should listen (--cmdctl-port).
	(Trac #615, git 5514dd78f2d61a222f3069fc94723ca33fb3200b)

201.	[bug]		jerry
	src/bin/bindctl: bindctl doesn't show traceback on shutdown.
	(Trac #588, git 662e99ef050d98e86614c4443326568a0b5be437)

200.	[bug]		Jelte
	Fixed a bug where incoming TCP connections were not closed.
	(Trac #589, git 1d88daaa24e8b1ab27f28be876f40a144241e93b)

199.	[func]		ocean
	Cache negative responses (NXDOMAIN/NODATA) from authoritative
	server for recursive resolver.
	(Trac #493, git f8fb852bc6aef292555063590c361f01cf29e5ca)

198.	[bug]		jinmei
	b10-auth, src/lib/datasrc: fixed a bug where hot spot cache failed
	to reuse cached SOA for negative responses.  Due to this bug
	b10-auth returned SERVFAIL when it was expected to return a
	negative response immediately after a specific SOA query for
	the zone.
	(Trac #626, git 721a53160c15e8218f6798309befe940b9597ba0)

197.	[bug]		zhang likun
	Remove expired message and rrset entries when looking up them
	in cache, touch or remove the rrset entry in cache properly
	when doing lookup or update.
	(Trac #661, git 9efbe64fe3ff22bb5fba46de409ae058f199c8a7)

196.	[bug]		jinmei
	b10-auth, src/lib/datasrc: the backend of the in-memory data
	source could not handle the root name.  As a result b10-auth could
	not work as a root server when using the in-memory data source.
	(Trac #683, git 420ec42bd913fb83da37b26b75faae49c7957c46)

195.	[func]		stephen
	Resolver will now re-try a query over TCP if a response to a UDP
	query has the TC bit set.
	(Trac #499, git 4c05048ba059b79efeab53498737abe94d37ee07)

194.	[bug]		vorner
	Solved a 100% CPU usage problem after switching addresses in b10-auth
	(and possibly, but unconfirmed, in b10-resolver). It was caused by
	repeated reads/accepts on closed socket (the bug was in the code for a
	long time, recent changes made it show).
	(Trac #657, git e0863720a874d75923ea66adcfbf5b2948efb10a)

193.	[func]*		jreed
	Listen on the IPv6 (::) and IPv4 (0.0.0.0) wildcard addresses
	for b10-auth. This returns to previous behavior prior to
	change #184. Document the listen_on configuration in manual.
	(Trac #649, git 65a77d8fde64d464c75917a1ab9b6b3f02640ca6)

192.	[func]*		jreed
	Listen on standard domain port 53 for b10-auth and
	b10-resolver.
	(Trac #617, #618, git 137a6934a14cf0c5b5c065e910b8b364beb0973f)

191.	[func]		jinmei
	Imported system test framework of BIND 9.  It can be run by
	'make systest' at the top source directory.  Notes: currently it
	doesn't work when built in a separate tree.  It also requires
	perl, an inherited dependency from the original framework.
	Also, mainly for the purpose of tests, a new option "--pid-file"
	was added to BoB, with which the boss process will dump its PID
	to the specified file.
	(Trac #606, git 6ac000df85625f5921e8895a1aafff5e4be3ba9c)

190.	[func]		jelte
	Resolver now sets random qids on outgoing queries using
	the boost::mt19937 prng.
	(Trac #583, git 5222b51a047d8f2352bc9f92fd022baf1681ed81)

189.	[bug]		jreed
	Do not install the log message compiler.
	(Trac #634, git eb6441aca464980d00e3ff827cbf4195c5a7afc5)

188.	[bug]		zhang likun
	Make the rrset trust level ranking algorithm used by
	isc::cache::MessageEntry::getRRsetTrustLevel() follow RFC2181
	section 5.4.1.
	(Trac #595 git 19197b5bc9f2955bd6a8ca48a2d04472ed696e81)

187.	[bug]		zhang likun
	Fix the assert error in class isc::cache::RRsetCache by adding the
	check for empty pointer and test case for it.
	(Trac #638, git 54e61304131965c4a1d88c9151f8697dcbb3ce12)

186.	[bug]		jelte
	b10-resolver could stop with an assertion failure on certain kinds
	of messages (there was a problem in error message creation). This
	fixes that.
	(Trac #607, git 25a5f4ec755bc09b54410fcdff22691283147f32)

185.	[bug]		vorner
	Tests use port from private range (53210), lowering chance of
	a conflict with something else (eg. running bind 10).
	(Trac #523, git 301da7d26d41e64d87c0cf72727f3347aa61fb40)

184.	[func]*		vorner
	Listening address and port configuration of b10-auth is the same as
	for b10-resolver now. That means, it is configured through bindctl
	at runtime, in the Auth/listen_on list, not through command line
	arguments.
	(Trac #575, #576, git f06ce638877acf6f8e1994962bf2dbfbab029edf)

183.	[bug]		jerry
	src/bin/xfrout: Enable parallel sessions between xfrout server and
	muti-Auth. The session needs to be created only on the first time
	or if an error occur.
	(Trac #419, git 1d60afb59e9606f312caef352ecb2fe488c4e751)

182.	[func]		jinmei
	Support cppcheck for static code check on C++ code.  If cppcheck
	is available, 'make cppcheck' on the top source directory will run
	the checker and should cleanly complete with an exit code of 0
	(at least with cppcheck 1.47).
	Note: the suppression list isn't included in the final
	distributions.  It should be created by hand or retrieved from
	the git repository.
	(Trac #613, git b973f67520682b63ef38b1451d309be9f4f4b218)

181.	[func]		feng
	Add stop interface into dns server, so we can stop each running
	server individually. With it, user can reconfigure her running server
	with different ip address or port.
	(Trac #388, git 6df94e2db856c1adc020f658cc77da5edc967555)

180.	[build]		jreed
	Fix custom DESTDIR for make install. Patch from Jan Engelhardt.
	(Trac #629, git 5ac67ede03892a5eacf42ce3ace1e4e376164c9f)

bind10-devel-20110224 released on February 24, 2011

179.	[func]		vorner
	It is possible to start and stop resolver and authoritative
	server without restart of the whole system. Change of the
	configuration (Boss/start_auth and Boss/start_resolver) is
	enough.
	(Trac #565, git 0ac0b4602fa30852b0d86cc3c0b4730deb1a58fe)

178.	[func]		jelte
	Resolver now makes (limited) use of the cache
	(Trac #491, git 8b41f77f0099ddc7ca7d34d39ad8c39bb1a8363c)

177.	[func]		stephen
	The upstream fetch code in asiolink is now protocol agnostic to
	allow for the addition of fallback to TCP if a fetch response
	indicates truncation.
	(Trac #554, git 9739cbce2eaffc7e80640db58a8513295cf684de)

176.	[func]		likun
	src/lib/cache: Rename one interface: from lookupClosestRRset()
	to lookupDeepestNS(), and remove one parameter of it.
	(Trac #492, git ecbfb7cf929d62a018dd4cdc7a841add3d5a35ae)

175.	[bug]		jerry
	src/bin/xfrout: Xfrout use the case-sensitive mode to compress
	names in an AXFR massage.
	(Trac #253, git 004e382616150f8a2362e94d3458b59bb2710182)

174.	[bug]*		jinmei
	src/lib/dns: revised dnssectime functions so that they don't rely
	on the time_t type (whose size varies on different systems, which
	can lead to subtle bugs like some form of "year 2038 problem").
	Also handled 32-bit wrap around issues more explicitly, with more
	detailed tests.  The function API has been changed, but the effect
	should be minimal because these functions are mostly private.
	(Trac #61, git 09ece8cdd41c0f025e8b897b4883885d88d4ba5d)

173.	[bug]		jerry
	python/isc/notify: A notify_out test fails without network
	connectivity, encapsulate the socket behavior using a mock
	socket class to fix it.
	(Trac #346, git 319debfb957641f311102739a15059f8453c54ce)

172.	[func]		jelte
	Improved the bindctl cli in various ways, mainly concerning
	list and map item addressing, the correct display of actual values,
	and internal help.
	(Trac #384, git e5fb3bc1ed5f3c0aec6eb40a16c63f3d0fc6a7b2)

171.	[func]		vorner
	b10-auth, src/lib/datasrc: in memory data source now works as a
	complete data source for authoritative DNS servers and b10-auth
	uses it.  It still misses major features, however, including
	DNSSEC support and zone transfer.
	(Last Trac #553, but many more,
	git 6f031a09a248e7684723c000f3e8cc981dcdb349)

170.	[bug]		jinmei
	Tightened validity checks in the NSEC3 constructors, both "from
	"text" and "from wire".  Specifically, wire data containing
	invalid type bitmaps or invalid lengths of salt or hash is now
	correctly rejected.
	(Trac #117, git 9c690982f24fef19c747a72f43c4298333a58f48)

169.	[func]		jelte
	Added a basic implementation for a resolver cache (though not
	used yet).
	(Trac #449, git 8aa3b2246ae095bbe7f855fd11656ae3bdb98986)

168.	[bug]		vorner
	Boss no longer has the -f argument, which was undocumented and
	stayed as a relict of previous versions, currently causing only
	strange behaviour.
	(Trac #572, git 17f237478961005707d649a661cc72a4a0d612d4)

167.	[bug]		naokikambe
	Fixed failure of termination of msgq_test.py with python3
	coverage (3.3.1).
	(Trac #573, git 0e6a18e12f61cc482e07078776234f32605312e5)

166.	[func]		jelte
	The resolver now sends back a SERVFAIL when there is a client
	timeout (timeout_client config setting), but it will not stop
	resolving (until there is a lookup timeout or a result).
	(Trac #497 and #489, git af0e5cd93bebb27cb5c4457f7759d12c8bf953a6)

165.	[func]		jelte
	The resolver now handles CNAMEs, it will follow them, and include
	them in the answer. The maximum length of CNAME chains that is
	supported is 16.
	(Trac #497, git af0e5cd93bebb27cb5c4457f7759d12c8bf953a6)

164.	[bug]		y-aharen
	IntervalTimer: Modified the interface to accept interval in
	milliseconds. It shortens the time of the tests of IntervalTimer.
	(Trac #452, git c9f6acc81e24c4b8f0eb351123dc7b43f64e0914)

163.	[func]		vorner
	The pimpl design pattern is used in UDPServer, with a shared
	pointer. This makes it smaller to copy (which is done a lot as a
	sideeffect of being coroutine) and speeds applications of this
	class (notably b10-auth) up by around 10%.
	(Trac #537, git 94cb95b1d508541201fc064302ba836164d3cbe6)

162.	[func]		stephen
	Added C++ logging, allowing logging at different severities.
	Code specifies the message to be logged via a symbol, and the
	logging code picks up the message from an in-built dictionary.
	The contents of the dictionary can be replaced at run-time by
	locale-specific messages.  A message compiler program is provided
	to create message header files and supply the default messages.
	(Trac #438, git 7b1606cea7af15dc71f5ec1d70d958b00aa98af7)

161.	[func]		stephen
	Added ResponseScrubber class to examine response from
	a server and to remove out-of-bailiwick RRsets.  Also
	does cross-section checks to ensure consistency.
	(Trac #496, git b9296ca023cc9e76cda48a7eeebb0119166592c5)

160.	[func]		jelte
  	Updated the resolver to take 3 different timeout values;
	timeout_query for outstanding queries we sent while resolving
	timeout_client for sending an answer back to the client
	timeout_lookup for stopping the resolving
	(currently 2 and 3 have the same final effect)
	(Trac #489, git 578ea7f4ba94dc0d8a3d39231dad2be118e125a2)

159.	[func]		smann
	The resolver now has a configurable set of root servers to start
	resolving at (called root_addresses). By default these are not
	(yet) filled in. If empty, a hardcoded address for f-root will be
	used right now.
	(Trac #483, git a07e078b4feeb01949133fc88c9939254c38aa7c)

158.	[func]		jelte
	The Resolver module will now do (very limited) resolving, if not
	set to forwarding mode (i.e. if the configuration option
	forward_addresses is left empty). It only supports referrals that
	contain glue addresses at this point, and does no other processing
	of authoritative answers.
	(Trac #484, git 7b84de4c0e11f4a070e038ca4f093486e55622af)

157.	[bug]		vorner
	One frozen process no longer freezes the whole b10-msgq. It caused the
	whole system to stop working.
	(Trac #420, git 93697f58e4d912fa87bc7f9a591c1febc9e0d139)

156.	[func]		stephen
	Added ResponseClassifier class to examine response from
	a server and classify it into one of several categories.
	(Trac #487, git 18491370576e7438c7893f8551bbb8647001be9c)

bind10-devel-20110120 released on January 20, 2011

155.	[doc]		jreed
	Miscellaneous documentation improvements for man pages and
	the guide, including auth, resolver, stats, xfrout, and
	zonemgr.  (git c14c4741b754a1eb226d3bdc3a7abbc4c5d727c0)

154.	[bug]		jinmei
	b10-xfrin/b10-zonemgr: Fixed a bug where these programs didn't
	receive command responses from CC sessions.  Eventually the
	receive buffer became full, and many other components that rely
	on CC channels would stall (as noted in #420 and #513).  This is
	an urgent care fix due to the severity of the problem; we'll need
	to revisit it for cleaner fix later.
	(Trac #516, git 62c72fcdf4617e4841e901408f1e7961255b8194)

153.	[bug]		jelte
	b10-cfgmgr: Fixed a bug where configuration updates sometimes
	lost previous settings in the configuration manager.
	(Trac #427, git 2df894155657754151e0860e2ca9cdbed7317c70)

152.	[func]*		jinmei
	b10-auth: Added new configuration variable "statistics-interval"
	to allow the user to change the timer interval for periodic
	statistics updates.  The update can also be disabled by setting
	the value to 0.  Disabling statistics updates will also work as
	a temporary workaround of a known issue that b10-auth can block in
	sending statistics and stop responding to queries as a result.
	(Trac #513, git 285c5ee3d5582ed6df02d1aa00387f92a74e3695)

151.	[bug]		smann
	lib/log/dummylog.h: 
	lib/log/dummylog.cc: Modify dlog so that it takes an optional
	2nd argument of type bool (true or false). This flag, if
	set, will cause the message to be printed whether or not
	-v is chosen.
        (Trac #432, git 880220478c3e8702d56d761b1e0b21b77d08ee5a)

150.	[bug]		jelte
	b10-cfgmgr: No longer save the configuration on exit. Configuration
	is already saved if it is changed successfully, so writing it on
	exit (and hence, when nothing has changed too) is unnecessary and
	may even cause problems.
	(Trac #435, git fd7baa38c08d54d5b5f84930c1684c436d2776dc)

149.	[bug]		jelte
	bindctl: Check if the user session has disappeared (either by a
	timeout or by a server restart), and reauthenticate if so. This
	fixes the 'cmdctl not running' problem.
        (Trac #431, git b929be82fec5f92e115d8985552f84b4fdd385b9)

148.	[func]		jelte
	bindctl: Command results are now pretty-printed (i.e. printed in
	a more readable form). Empty results are no longer printed at all
	(used to print '{}'), and the message
	'send the command to cmd-ctrl' has also been removed.
	(git 3954c628c13ec90722a2d8816f52a380e0065bae)

147.	[bug]		jinmei
	python/isc/config: Fixed a bug that importing custom configuration
	(in b10-config.db) of a remote module didn't work.
	(Trac #478, git ea4a481003d80caf2bff8d0187790efd526d72ca)

146.	[func]		jelte
	Command arguments were not validated internally against their
	specifications. This change fixes that (on the C++ side, Python
	side depends on an as yet planned addition). Note: this is only
	an added internal check, the cli already checks format.
	(Trac #473, git 5474eba181cb2fdd80e2b2200e072cd0a13a4e52)

145.	[func]*		jinmei
	b10-auth: added a new command 'loadzone' for (re)loading a
	specific zone.  The command syntax is generic but it is currently
	only feasible for class IN in memory data source.  To reload a
	zone "example.com" via bindctl, execute the command as follows:
	> Auth loadzone origin = example.com
	(Trac #467 git 4f7e1f46da1046de527ab129a88f6aad3dba7562
	from 1d7d3918661ba1c6a8b1e40d8fcbc5640a84df12)

144.	[build]		jinmei
	Introduced a workaround for clang++ build on FreeBSD (and probably
	some other OSes).  If building BIND 10 fails with clang++ due to
	a link error about "__dso_handle", try again from the configure
	script with CXX_LIBTOOL_LDFLAGS=-L/usr/lib (the path actually
	doesn't matter; the important part is the -L flag).  This
	workaround is not automatically enabled as it's difficult to
	detect the need for it dynamically, and must be enabled via the
	variable by hand.
	(Trac #474, git cfde436fbd7ddf3f49cbbd153999656e8ca2a298)

143.	[build]		jinmei
	Fixed build problems with clang++ in unit tests due to recent
	changes.  No behavior change. (Trac #448, svn r4133)

142.	[func]		jinmei
	b10-auth: updated query benchmark so that it can test in memory
	data source.  Also fixed a bug that the output buffer isn't
	cleared after query processing, resulting in misleading results
	or program crash.  This is a regression due to change #135.
	(Trac #465, svn r4103)

141.	[bug]		jinmei
	b10-auth: Fixed a bug that the authoritative server includes
	trailing garbage data in responses.  This is a regression due to
	change #135. (Trac #462, svn r4081)

140.	[func]		y-aharen
	src/bin/auth: Added a feature to count queries and send counter
	values to statistics periodically. To support it, added wrapping
	class of asio::deadline_timer to use as interval timer.
	The counters can be seen using the "Stats show" command from
	bindctl.  The result would look like:
	  ... "auth.queries.tcp": 1, "auth.queries.udp": 1 ...
	Using the "Auth sendstats" command you can make b10-auth send the
	counters to b10-stats immediately.
	(Trac #347, svn r4026)

139.	[build]		jreed
	Introduced configure option and make targets for generating
	Python code coverage report. This adds new make targets:
	report-python-coverage and clean-python-coverage. The C++
	code coverage targets were renamed to clean-cpp-coverage
	and report-cpp-coverage. (Trac #362, svn r4023)

138.	[func]*		jinmei
	b10-auth: added a configuration interface to support in memory
	data sources.  For example, the following command to bindctl
	will configure a memory data source containing the "example.com"
	zone with the zone file named "example.com.zone":
	> config set Auth/datasources/ [{"type": "memory", "zones": \
	 [{"origin": "example.com", "file": "example.com.zone"}]}]
	By default, the memory data source is disabled; it must be
	configured explicitly.  To disable it again, specify a null list
	for Auth/datasources:
	> config set Auth/datasources/ []
	Notes: it's currently for class IN only.  The zone files are not
	actually loaded into memory yet (which will soon be implemented).
	This is an experimental feature and the syntax may change in
	future versions.
	(Trac #446, svn r3998)

137.	[bug]		jreed
	Fix run_*.sh scripts that are used for development testing
	so they use a msgq socket file in the build tree.
	(Trac #226, svn r3989)

136.	[bug]		jelte
  	bindctl (and the configuration manager in general) now no longer
	accepts 'unknown' data; i.e. data for modules that it does not know
	about, or configuration items that are not specified in the .spec
	files.
	(Trac #202, svn r3967)

135.	[func]		each
	Add b10-resolver. This is an example recursive server that
	currently does forwarding only and no caching.
	(Trac #327, svn r3903)

134.	[func]		vorner
	b10-resolver supports timeouts and retries in forwarder mode.
	(Trac #401, svn r3660)

133.	[func]		vorner
	New temporary logging function available in isc::log. It is used by
	b10-resolver.
	(Trac #393, r3602)

132.	[func]		vorner
	The b10-resolver is configured through config manager.
	It has "listen_on" and "forward_addresses" options.
	(Trac #389, r3448)

131.	[func]		jerry
	src/lib/datasrc: Introduced two template classes RBTree and RBNode
	to provide the generic map with domain name as key and anything as
	the value. Because of some unresolved design issue, the new classes
	are only intended to be used by memory zone and zone table.
	(Trac #397, svn r3890)

130.	[func]		jerry
	src/lib/datasrc: Introduced a new class MemoryDataSrc to provide
	the general interface for memory data source.  For the initial
	implementation, we don't make it a derived class of AbstractDataSrc
	because the interface is so different (we'll eventually
	consider this as part of the generalization work).
	(Trac #422, svn r3866)

129.	[func]		jinmei
	src/lib/dns: Added new functions masterLoad() for loading master
	zone files.  The initial implementation can only parse a limited
	form of master files, but BIND 9's named-compilezone can convert
	any valid zone file into the acceptable form.
	(Trac #423, svn r3857)

128.	[build]		vorner
	Test for query name = '.', type = DS to authoritative nameserver
	for root zone was added.
	(Trac #85, svn r3836)

127.	[bug]		stephen
	During normal operation process termination and resurrection messages
	are now output regardless of the state of the verbose flag.
	(Trac #229, svn r3828)

126.	[func]		ocean
	The Nameserver Address Store (NSAS) component has been added. It takes
	care of choosing an IP address of a nameserver when a zone needs to be
	contacted.
	(Trac #356, Trac #408, svn r3823)

bind10-devel-20101201 released on December 01, 2010

125.	[func]		jelte
	Added support for addressing individual list items in bindctl
	configuration commands; If you have an element that is a list, you
	can use foo[X]		integer
	(starting at 0)
	(Trac #405, svn r3739)

124.	[bug]		jreed
	Fix some wrong version reporting. Now also show the version
	for the component and BIND 10 suite. (Trac #302, svn r3696)

123.	[bug]		jelte
	src/bin/bindctl printed values had the form of python literals
	(e.g. 'True'), while the input requires valid JSON (e.g. 'true').
	Output changed to JSON format for consistency. (svn r3694)

122.	[func]		stephen
	src/bin/bind10: Added configuration options to Boss to determine
	whether to start the authoritative server, recursive server (or
	both). A dummy program has been provided for test purposes.
	(Trac #412, svn r3676)

121.	[func]		jinmei
	src/lib/dns: Added support for TSIG RDATA.  At this moment this is
	not much of real use, however, because no protocol support was
	added yet.  It will soon be added. (Trac #372, svn r3649)

120.	[func]		jinmei
	src/lib/dns: introduced two new classes, TSIGKey and TSIGKeyRing,
	to manage TSIG keys. (Trac #381, svn r3622)

119.	[bug]		jinmei
	The master file parser of the python datasrc module incorrectly
	regarded a domain name beginning with a decimal number as a TTL
	specification.  This confused b10-loadzone and had it reject to
	load a zone file that contains such a name.
	Note: this fix is incomplete and the loadzone would still be
	confused if the owner name is a syntactically indistinguishable
	from a TTL specification.  This is part of a more general issue
	and will be addressed in Trac #413. (Trac #411, svn r3599)

118.	[func]		jinmei
	src/lib/dns: changed the interface of
	AbstractRRset::getRdataIterator() so that the internal
	cursor would point to the first RDATA automatically.  This
	will be a more intuitive and less error prone behavior.
	This is a backward compatible change. (Trac #410, r3595)

117.	[func]		jinmei
	src/lib/datasrc: added new zone and zone table classes for the
	support of in memory data source.  This is an intermediate step to
	the bigger feature, and is not yet actually usable in practice.
	(Trac #399, svn r3590)

116.	[bug]		jerry
	src/bin/xfrout: Xfrout and Auth will communicate by long tcp
	connection, Auth needs to make a new connection only on the first
	time or if an error occurred.
	(Trac #299, svn r3482)

115.	[func]*		jinmei
	src/lib/dns: Changed DNS message flags and section names from
	separate classes to simpler enums, considering the balance between
	type safety and usability.  API has been changed accordingly.
	More documentation and tests were provided with these changes.
	(Trac #358, r3439)

114.	[build]		jinmei
	Supported clang++.  Note: Boost >= 1.44 is required.
	(Trac #365, svn r3383)

113.	[func]*		zhanglikun
	Folder name 'utils'(the folder in /src/lib/python/isc/) has been
	renamed	to 'util'. Programs that used 'import isc.utils.process'
	now need to use 'import isc.util.process'. The folder
	/src/lib/python/isc/Util is removed since it isn't used by any
	program. (Trac #364, r3382)

112.	[func]		zhang likun
	Add one mixin class to override the naive serve_forever() provided
	in python library socketserver. Instead of polling for shutdown
	every poll_interval seconds, one socketpair is used to wake up
	the waiting server. (Trac #352, svn r3366)

111.	[bug]*		Vaner
	Make sure process xfrin/xfrout/zonemgr/cmdctl can be stopped
	properly when user enter "ctrl+c" or 'Boss shutdown' command
	through bindctl.  The ZonemgrRefresh.run_timer and
	NotifyOut.dispatcher spawn a thread themselves.
	(Trac #335, svn r3273)

110.	[func]		Vaner
	Added isc.net.check module to check ip addresses and ports for
	correctness and isc.net.addr to hold IP address. The bind10, xfrin
	and cmdctl programs are modified to use it.
	(Trac #353, svn r3240)

109.	[func]		naokikambe
	Added the initial version of the stats module for the statistics
	feature of BIND 10, which supports the restricted features and
	items and reports via bindctl command. (Trac #191, r3218)
	Added the document of the stats module, which is about how stats
	module collects the data (Trac #170, [wiki:StatsModule])

108.	[func]		jerry
	src/bin/zonemgr: Provide customizable configurations for
	lowerbound_refresh, lowerbound_retry, max_transfer_timeout and
	jitter_scope. (Trac #340, r3205)

107.	[func]		likun
	Remove the parameter 'db_file' for command 'retransfer' of
	xfrin module. xfrin.spec will not be generated by script.
	(Trac #329, r3171)

106.	[bug]		likun
	When xfrin can't connect with one zone's master, it should tell
	the bad news to zonemgr, so that zonemgr can reset the timer for
	that zone. (Trac #329, r3170)

105.	[bug]		Vaner
	Python processes: they no longer take 100% CPU while idle
	due to a busy loop in reading command session in a nonblocking way.
	(Trac #349, svn r3153), (Trac #382, svn r3294)

104.	[bug]		jerry
	bin/zonemgr: zonemgr should be attempting to refresh expired zones.
	(Trac #336, r3139)
 
103.	[bug]		jerry
	lib/python/isc/log: Fixed an issue with python logging,
	python log shouldn't die with OSError. (Trac #267, r3137)
 
102.	[build]		jinmei
	Disable threads in ASIO to minimize build time dependency.
	(Trac #345, r3100)

101.	[func]		jinmei
	src/lib/dns: Completed Opcode and Rcode implementation with more
	tests and documentation.  API is mostly the same but the
	validation was a bit tightened. (Trac #351, svn r3056)

100.	[func]		Vaner
	Python processes: support naming of python processes so
	they're not all called python3.
	(Trac #322, svn r3052)

99.	[func]*		jinmei
	Introduced a separate EDNS class to encapsulate EDNS related
	information more cleanly.  The related APIs are changed a bit,
	although it won't affect most of higher level applications.
	(Trac #311, svn r3020)

98.	[build]		jinmei
	The ./configure script now tries to search some common include
	paths for boost header files to minimize the need for explicit
	configuration with --with-boost-include. (Trac #323, svn r3006)

97.	[func]		jinmei
	Added a micro benchmark test for query processing of b10-auth.
	(Trac #308, svn r2982)

96.	[bug]		jinmei
	Fixed two small issues with configure: Do not set CXXFLAGS so that
	it can be customized; Make sure --disable-static works.
	(Trac #325, r2976)

bind10-devel-20100917 released on September 17, 2010 

95.	[doc]		jreed
	Add b10-zonemgr manual page. Update other docs to introduce
	this secondary manager. (Trac #341, svn r2951)

95.	[bug]		jreed
	bin/xfrout and bin/zonemgr: Fixed some stderr output.
	(Trac #342, svn r2949)

94.	[bug]		jelte
  	bin/xfrout:  Fixed a problem in xfrout where only 2 or 3 RRs
	were used per DNS message in the xfrout stream.
	(Trac #334, r2931)

93.	[bug]		jinmei
	lib/datasrc: A DS query could crash the library (and therefore,
	e.g. the authoritative server) if some RR of the same apex name
	is stored in the hot spot cache. (Trac #307, svn r2923)

92.	[func]*		jelte
	libdns_python (the python wrappers for libdns++) has been renamed
	to pydnspp (Python DNS++). Programs and libraries that used
	'import libdns_python' now need to use 'import pydnspp'.
	(Trac #314, r2902)

91.	[func]*		jinmei
	lib/cc: Use const pointers and const member functions for the API
	as much as possible for safer operations.  Basically this does not
	change the observable behavior, but some of the API were changed
	in a backward incompatible manner.  This change also involves more
	copies, but at this moment the overhead is deemed acceptable.
	(Trac #310, r2803)

90.	[build]		jinmei
	(Darwin/Mac OS X specific) Specify DYLD_LIBRARY_PATH for tests and
	experimental run under the source tree.  Without this loadable
	python modules refer to installation paths, which may confuse the
	operation due to version mismatch or even trigger run time errors
	due to missing libraries. (Trac #313, r2782)

89.	[build]		jinmei
	Generate b10-config.db for tests at build time so that the source
	tree does not have to be writable. (Trac #315, r2776)

88.	[func]		jelte
	Blocking reads on the msgq command channel now have a timeout
	(defaults to 4 seconds, modifiable as needed by modules).
	Because of this, modules will no longer block indefinitely
	if they are waiting for a message that is not sent for whatever
	reason. (Trac #296, r2761)

87.	[func]		zhanglikun
	lib/python/isc/notifyout: Add the feature of notify-out, when 
	zone axfr/ixfr finishing, the server will notify its slaves.
	(Trac #289, svn r2737)

86.	[func]		jerry
	bin/zonemgr: Added zone manager module. The zone manager is one 
	of the co-operating processes of BIND10, which keeps track of 
	timers and other information necessary for BIND10 to act as a 
	slave. (Trac #215, svn r2737)

85.	[build]*		jinmei
	Build programs using dynamic link by default.  A new configure
	option --enable-static-link is provided to force static link for
	executable programs.  Statically linked programs can be run on a
	debugger more easily and would be convenient for developers.
	(Trac #309, svn r2723)

bind10-devel-20100812 released on August 12, 2010

84.	[bug]		jinmei, jerry
	This is a quick fix patch for the issue: AXFR fails half the 
	time because of connection problems. xfrout client will make
	a new connection every time. (Trac #299, svn r2697)

83.	[build]*		jreed
	The configure --with-boost-lib option is removed. It was not
	used since the build included ASIO. (svn r2684)

82.	[func]		jinmei
	bin/auth: Added -u option to change the effective process user
	of the authoritative server after invocation.  The same option to
	the boss process will be propagated to b10-auth, too.
	(Trac #268, svn r2675)

81.	[func]		jinmei
	Added a C++ framework for micro benchmark tests.  A supplemental
	library functions to build query data for the tests were also
	provided. (Trac #241, svn r2664)

80.	[bug]		jelte
	bindctl no longer accepts configuration changes for unknown or
	non-running modules (for the latter, this is until we have a
	way to verify those options, at which point it'll be allowed
	again).
	(Trac #99, r2657)

79.	[func]		feng, jinmei
	Refactored the ASIO link interfaces to move incoming XFR and
	NOTIFY processing to the auth server class.  Wrapper classes for
	ASIO specific concepts were also provided, so that other BIND 10
	modules can (eventually) use the interface without including the
	ASIO header file directly.  On top of these changes, AXFR and
	NOTIFY processing was massively improved in terms of message
	validation and protocol conformance.  Detailed tests were provided
	to confirm the behavior.
	Note: Right now, NOTIFY doesn't actually trigger subsequent zone
	transfer due to security reasons. (Trac #221, r2565)

78.	[bug]		jinmei
	lib/dns: Fixed miscellaneous bugs in the base32 (hex) and hex
	(base16) implementation, including incorrect padding handling,
	parser failure in decoding with a SunStudio build, missing
	validation on the length of encoded hex string.  Test cases were
	more detailed to identify these bugs and confirm the fix.  Also
	renamed the incorrect term of "base32" to "base32hex".  This
	changed the API, but they are not intended to be used outside
	libdns++, so we don't consider it a backward incompatible change.
	(Trac #256, r2549)

77.	[func]		zhanglikun
	Make error message be more friendly when running cmdctl and it's 
	already running (listening on same port)(Trac #277, r2540)

76.	[bug]		jelte
	Fixed a bug in the handling of 'remote' config modules (i.e.
	modules that peek at the configuration of other modules), where
	they answered 'unknown command' to commands for those other
	modules. (Trac #278, r2506)

75.	[bug]		jinmei
	Fixed a bug in the sqlite3 data source where temporary strings
	could be referenced after destruction.  It caused various lookup
	failures with SunStudio build. (Trac #288, r2494)

74.	[func]*		jinmei
	Refactored the cc::Session class by introducing an abstract base
	class.  Test code can use their own derived mock class so that
	tests can be done without establishing a real CC session.  This
	change also modified some public APIs, mainly in the config
	module. (Trac #275, r2459)

73.	[bug]		jelte
  	Fixed a bug where in bindctl, locally changed settings were
	reset when the list of running modules is updated. (Trac #285,
	r2452)

72.	[build]		jinmei
	Added -R when linking python wrapper modules to libpython when
	possible.  This helps build BIND 10 on platforms that install
	libpython whose path is unknown to run-time loader.  NetBSD is a
	known such platform. (Trac #148, r2427)

71.	[func]		each
  	Add "-a" (address) option to bind10 to specify an address for
	the auth server to listen on.

70.	[func]		each
  	Added a hot-spot cache to libdatasrc to speed up access to
	repeatedly-queried data and reduce the number of queries to
	the underlying database; this should substantially improve
	performance.  Also added a "-n" ("no cache") option to
	bind10 and b10-auth to disable the cache if needed.
	(Trac #192, svn r2383)

bind10-devel-20100701 released on July 1, 2010

69.	[func]*		jelte
	Added python wrappers for libdns++ (isc::dns), and libxfr. This
	removes the dependency on Boost.Python. The wrappers don't
	completely implement all functionality, but the high-level API
	is wrapped, and current modules use it now.
	(Trac #181, svn r2361)

68.	[func]		zhanglikun
	Add options -c (--certificate-chain) to bindctl. Override class
	HTTPSConnection to support server certificate validation.
	Add support to cmdctl.spec file, now there are three configurable 
	items for cmdctl: 'key_file', 'cert_file' and 'accounts_file', 
	all of them can be changed in runtime.
	(Trac #127, svn r2357)

67.	[func]		zhanglikun
	Make bindctl's command parser only do minimal check.
	Parameter value can be a sequence of non-space characters,
	or a string surrounded by quotation marks (these marks can
	be a part of the value string in escaped form). Make error
	message be more friendly. (If there is some error in
	parameter's value, the parameter name will be provided).
	Refactor function login_to_cmdctl() in class BindCmdInterpreter:
	avoid using Exception to catch all exceptions.
	(Trac #220, svn r2356)

66.	[bug]		each
	Check for duplicate RRsets before inserting data into a message
	section; this, among other things, will prevent multiple copies
	of the same CNAME from showing up when there's a loop. (Trac #69,
	svn r2350)
    
65.	[func]		shentingting
	Various loadzone improvements: allow optional comment for
	$TTL, allow optional origin and comment for $INCLUDE, allow
	optional comment for $ORIGIN, support BIND9 extension of
	time units for TTLs, and fix bug to not use class as part
	of label name when records don't have a label but do have
	a class.  Added verbose options to exactly what is happening
	with loadzone.  Added loadzone test suite of different file
	formats to load.
	(Trac #197, #199, #244, #161, #198, #174, #175, svn r2340)

64.	[func]		jerry
	Added python logging framework. It is for testing and
	experimenting with logging ideas. Currently, it supports
	three channels (file, syslog and stderr) and five levels
	(debug, info, warning, error and critical).
	(Trac #176, svn r2338)

63.	[func]		shane
	Added initial support for setuid(), using the "-u" flag. This will
	be replaced in the future, but for now provides a reasonable 
	starting point.
	(Trac #180, svn r2330)

62.	[func]		jelte
	bin/xfrin: Use the database_file as configured in Auth to transfers
	bin/xfrout: Use the database_file as configured in Auth to transfers

61.	[bug]		jelte
	bin/auth: Enable b10-auth to be launched in source tree
	(i.e. use a zone database file relative to that)

60.	[build]		jinmei
	Supported SunStudio C++ compiler.  Note: gtest still doesn't work.
	(Trac #251, svn r2310)

59.	[bug]		jinmei
	lib/datasrc,bin/auth: The authoritative server could return a
	SERVFAIL with a partial answer if it finds a data source broken
	while looking for an answer.  This can happen, for example, if a
	zone that doesn't have an NS RR is configured and loaded as a
	sqlite3 data source. (Trac #249, r2286)

58.	[bug]		jinmei
	Worked around an interaction issue between ASIO and standard C++
	library headers.  Without this ASIO didn't work: sometimes the
	application crashes, sometimes it blocked in the ASIO module.
	(Trac #248, svn r2187, r2190)

57.	[func]		jinmei
	lib/datasrc: used a simpler version of Name::split (change 31) for
	better readability.  No behavior change. (Trac #200, svn r2159)

56.	[func]*		jinmei
	lib/dns: renamed the library name to libdns++ to avoid confusion
	with the same name of library of BIND 9.
	(Trac #190, svn r2153)

55.	[bug]		shane
	bin/xfrout: xfrout exception on Ctrl-C now no longer generates
	exception for 'Interrupted system call'
	(Trac #136, svn r2147)

54.	[bug]		zhanglikun
	bin/xfrout: Enable b10-xfrout can be launched in source
	code tree.
	(Trac #224, svn r2103)

53.	[bug]		zhanglikun
	bin/bindctl: Generate a unique session ID by using 
	socket.gethostname() instead of socket.gethostbyname(), 
	since the latter one could make bindctl	stall if its own 
	host name can't be resolved.
	(Trac #228, svn r2096)

52.	[func]		zhanglikun
	bin/xfrout: When xfrout is launched, check whether the
	socket file is being used by one running xfrout process, 
	if it is, exit from python.	If the file isn't a socket file 
	or nobody is listening, it will be removed. If it can't 
	be removed, exit from python.
	(Trac #151, svn r2091)

bind10-devel-20100602 released on June 2, 2010

51.	[build]		jelte
	lib/python: Add bind10_config.py module for paths and
	possibly other configure-time variables. Allow some components
	to find spec files in build tree when ran from source.
	(Trac #223)

50.	[bug]		zhanglikun
	bin/xfrin: a regression in xfrin: it can't communicate with 
	a remote server. (Trac #218, svn r2038)

49.	[func]*		jelte
	Use unix domain sockets for msgq. For b10-msgq, the command
	line options --msgq-port and -m were removed. For bind10,
	the -msgq-port option was removed, and the -m command line
	option was changed to be a filename (instead of port number).
	(Trac #183, svn r2009)

48.	[func]		jelte
	bin/auth: Use asio's io_service for the msgq handling.
	(svn r2007)

47.	[func]		zhanglikun
	bin/cmdctl: Add value/type check for commands sent to
	cmdctl. (Trac #201, svn r1959)

46.	[func]		zhanglikun
	lib/cc: Fix real type data encoding/decoding. (Trac #193,
	svn r1959)

45.	[func]		zhanglikun
	bin/bind10: Pass verbose option to more modules. (Trac
	#205, svn r1957)

44.	[build]		jreed
	Install headers for libdns and libexception. (Trac #68,
	svn r1941)

43.	[func]		jelte
	lib/cc: Message queuing on cc channel. (Trac #58, svn r1870)

42.	[func]		jelte
	lib/python/isc/config:      Make temporary file with python
	tempfile module instead of manual with fixed name. (Trac
	#184, svn r1859)

41.	[func]		jelte
	Module descriptions in spec files. (Trac #90, svn r1856)

40.	[build]		jreed
	Report detected features and configure settings at end of
	configure output. (svn r1836)

39.	[func]*		each
	Renamed libauth to libdatasrc.

38.	[bug]		zhanglikun
	Send command 'shutdown' to Xfrin and Xfrout when boss receive SIGINT.
	Remove unused socket file when Xfrout process exits. Make sure Xfrout
	exit by itself when it receives SIGINT, instead of being killed by the
	signal SIGTERM or SIGKILL sent from boss.
	(Trac #135, #151, #134, svn r1797)

37.	[build]		jinmei
	Check for the availability of python-config. (Trac #159,
	svn r1794)

36.	[func]		shane
	bin/bind10:	Miscellaneous code cleanups and improvements.
	(Trac #40, svn r2012)

35.	[bug]		jinmei
	bin/bindctl: fixed a bug that it didn't accept IPv6 addresses as
	command arguments. (Trac #219, svn r2022)

34.	[bug]		jinmei
	bin/xfrin: fixed several small bugs with many additional unit
	tests.  Fixes include: IPv6 transport support, resource leak,
	and non IN class support. (Trac #185, svn r2000)

33.	[bug]		each
	bin/auth: output now prepended with "[b10-auth]" (Trac
	#109, svn r1985)

32.	[func]*		each
	bin/auth: removed custom query-processing code, changed
        boost::asio code to use plain asio instead, and added asio
        headers to the source tree.  This allows building without
        using an external boost library. (Trac #163, svn r1983)

31.	[func]		jinmei
	lib/dns: added a separate signature for Name::split() as a
	convenient wrapper for common usage. (Trac #49, svn r1903)

30.	[bug]		jinmei
	lib/dns: parameter validation of Name::split() was not sufficient,
	and invalid parameters could cause integer overflow and make the
	library crash. (Trac #177, svn r1806)

bind10-devel-20100421 released on April 21, 2010

29.	[build]		jreed
	Enable Python unit tests for "make check". (svn r1762)

28.	[bug]		jreed
	Fix msgq CC test so it can find its module. (svn r1751)

27.	[build]		jelte
	Add missing copyright license statements to various source
	files. (svn r1750)

26.	[func]		jelte
	Use PACKAGE_STRING (name + version) from config.h instead
	of hard-coded value in CH TXT version.bind replies (Trac
	#114, svn r1749)

25.	[func]*		jreed
	Renamed msgq to b10-msgq. (Trac #25, svn r1747, r1748)

24.	[func]		jinmei
	Support case-sensitive name compression in MessageRenderer.
	(Trac #142, svn r1704)

23.	[func]		jinmei
	Support a simple name with possible compression. (svn r1701)

22.	[func]		zhanglikun
	b10-xfrout for AXFR-out support added. (svn r1629, r1630)

21.	[bug]		zhanglikun
	Make log message more readable when xfrin failed. (svn
	r1697)

20.	[bug]		jinmei
	Keep stderr for child processes if -v is specified. (svn
	r1690, r1698)

19.	[bug]		jinmei
	Allow bind10 boss to pass environment variables from parent.
	(svn r1689)

18.	[bug]		jinmei
	Xfrin warn if bind10_dns load failed. (svn r1688)

17.	[bug]		jinmei
	Use sqlite3_ds.load() in xfrin module and catch Sqlite3DSError
	explicitly. (svn r1684)

16.	[func]*		zhanglikun
	Removed print_message and print_settings configuration
	commands from Xfrin. (Trac #136, svn r1682)

15.	[func]*		jinmei
	Changed zone loader/updater so trailing dot is not required.
	(svn r1681)

14.	[bug]		shane
	Change shutdown to actually SIGKILL properly. (svn r1675)

13.	[bug]		jinmei
	Don't ignore other RRs than SOA even if the second SOA is
	found. (svn r1674)

12.	[build]		jreed
	Fix tests and testdata so can be used from a read-only
	source directory.

11.	[build]		jreed
	Make sure python tests scripts are included in tarball.
	(svn r1648)

10.	[build]		jinmei
	Improve python detection for configure. (svn r1622)

9.	[build]		jinmei
	Automake the python binding of libdns. (svn r1617)

8.	[bug]		zhanglikun
	Fix log errors which may cause xfrin module to crash. (svn
	r1613)

7.	[func]		zhanglikun
	New API for inserting zone data to sqlite3 database for
	AXFR-in. (svn r1612, r1613)

6.	[bug]		jreed
	More code review, miscellaneous cleanups, style guidelines,
	and new and improved unit tests added.

5.	[doc]		jreed
	Manual page cleanups and improvements.

4.	[bug]		jinmei
	NSEC RDATA fixes for buffer overrun lookups, incorrect
	boundary checks, spec-non-conformant behaviors. (svn r1611)

3.	[bug]		jelte
	Remove a re-raise of an exception that should only have
	been included in an error answer on the cc channel. (svn
	r1601)

2.	[bug]		mgraff
	Removed unnecessary sleep() from ccsession.cc. (svn r1528)

1.	[build]*		jreed
	The configure --with-boostlib option changed to --with-boost-lib.

bind10-devel-20100319 released on March 19, 2010

For complete code revision history, see http://bind10.isc.org/browser
Specific git changesets can be accessed at:
	http://bind10.isc.org/changeset/?reponame=&old=rrrr^&new=rrrr
or after cloning the original git repository by executing:
	% git diff rrrr^ rrrr
Subversion changesets are not accessible any more.  The subversion
revision numbers will be replaced with corresponding git revisions.
Trac tickets can be accessed at: https://bind10.isc.org/ticket/nnn

LEGEND
[bug] general bug fix.  This is generally a backward compatible change,
	unless it's deemed to be impossible or very hard to keep
	compatibility to fix the bug.
[build] compilation and installation infrastructure change.
[doc] update to documentation. This shouldn't change run time behavior.
[func] new feature.  In some cases this may be a backward incompatible
	change, which would require a bump of major version.
[security] security hole fix. This is no different than a general bug
	fix except that it will be handled as confidential and will cause
	security patch releases.
*: Backward incompatible or operational change.